VR6002 / BEAULIEU [Video recorder - 2000]

• Capstan and reel-motor do not start up. Playback, REW and FF do not work. T7406 is fine.
• No sound during EE.
• No picture during playback, the appliance is in the record function during playback.
• Hum on EE picture.
• Increase in reliability of reel motor.
• No functions.
• REV does not operate.
• No display and no command function after loading the cassette.
• Partial operating fault (F chassis). Motor runs in standby.
• No sound in REC and crackling. PB ok, picture ok in REC.
• Flickering in the picture.
• During playback there is black distortion across the whole picture.
• Stripes on picture, occasionally is not synchronized.
• FF, REW and PB functions are defective. Switches off immediately.
• Fuses 1006 and 1008 blow. (VR6002 tips)
• No picture via VCR or tuner.
• The appliance stops occasionally in playback.
• The appliance laces up and unlaces immediately. The videohead does not start up.
• The appliance does not always function.
• No function, the display is dark.
• EE picture visible in PB via both RF and scart. EE sound in PB (ok via scart). REC in standby. RF sound from wrong TV channel. No sound via scart. Distorted picture in PB without aerial.
• Audio head interference during playback.
• Laces up and switches off after a few seconds.
• No tape end switch off.
• The counter display does not work, "0" is shown continuously. (VR6002 tip from BEAULIEU)
• No picture during playback, freeze frame and reverse are ok.
• Only a whistling sound can be heard.
• Modulator is loose after repeatedly inserting TV aerial plug.
• No colour in PB.
• Appliance switches off immediately.
• Battery discharged in approx. 12 days.
• At start up appliance begins to initialise then stops (time goes out).
• At start up the appliance switches off (clock also). In version F, the same occurs in stand-by.
• No power supply in version F.
• The cassette compartment opens then closes.
• Modulator pos. 110 moves backwards and forwards due to the continuous plugging in of the TV-aerial plug. A print breakage follows.
• No FF and REW, after operating PB the tape curls up.
• Appliance stops in playback.
• Tape drive faults; tape rattle or appliance switches off.
• Sudden stop of picture in PB.
• Actuator contact interference. (BEAULIEU - VR6002 information)
• No capstan rotation.
• No picture during own recording PB is ok.
• In play the appliance lacces the tape in then stops. In fast forward the appliance starts up then stops (version F).