VRPSYNC / BEAULIEU [Video recorder - VHS HiFi]

• No EE and no test bars possible. Playback is ok.
• During record the appliance jumps automatically back to play mode.
• Picture vibrates, motor noise audible. (service info for BEAULIEU -VRPSYNC)
• During slow motion and forward picture search, the tape will not move forward. (extract of circuit diagram attached)
• Tracking fix adjustment.
• Tape is damaged.
• The supply reel does not move. (part of circuit diagram displayed)
• No REW. (+ extract of circuit diagram)
• The winding solenoid does not pull in (extract of circuit diagram attached)
• The old sound is not erased and the new sound is only occasionally on the tape. (with circuit diagram extract)
• No rewind (appliance displays REW, tape winds in the opposite direction).
• The supply and take-up motors do not brake. (extract of circuit diagram attached)
• Supporting belt slipping off.
• No picture. in PB.
• All LED segments light and switch off after short period. (+ extract of circuit diagram)
• Audio PB level adjustment.
• The colour is bad with own recording
• After switching on the loading motor turns, loud noises can be heard and after approx. 10 sec. the appliance switches off again.
• No FF. (+ extract of circuit diagram)
• Tape damage during search. (picture attached)
• During play the appliance laces up as normal but the capstan does not start. The appliance switches off again. (+ extract of circuit diagram)
• On FF and play the take-up motor will not turn. (+ extract of circuit diagram)
• No capstan rotation. Shuts down.
• Appliance shows insert function on the display, but will not record the picture that is shown on the TV. (+ extract of circuit diagram)
• Does not change channels. after a while.
• Regulated +5V adjustment.
• Cassette flap springs open or does not open at all. (VRPSYNC tip from BEAULIEU)
• Poor picture. (extract of circuit diagram attached)
• No start-up. No operation. (part of circuit diagram displayed)
• No audio. in E-E.
• Mechanism jammed.
• During own recording only chroma is present, luminance is missing completely. (+ extract of circuit diagram)
• Confirmation of chrominance recording current.
• No power (F601 O/P). (picture attached)
• Dead. (+ extract of circuit diagram)
• Fine slow speed adjustment.
• No colour in PB.
• Drum/head speed fast. No functions. (part of circuit diagram displayed)
• Supply motor locks up or runs jerkily
• Replacement of video processor U4606. (BEAULIEU - VRPSYNC information)
• The power supply unit is defective. During switching on the new fitted IC1002 burns off immediately.
• The programmes cannot be changed on the timer.
• Audio bias level adjustment.
• The servo turns too fast, the picture runs. (part of circuit diagram displayed)
• Sometimes "B" is shown in the display and the appliance switches off. "C" for battery failure shows on the display. (BEAULIEU - VRPSYNC information)
• No function, stop LED flashes.
• During play the cassette does not start
• No drum/head rotation. (extract of circuit diagram attached)
• During play and record the appliance laces up for a short time and unlaces again. The head drum does not run. (with circuit diagram extract) (BEAULIEU - VRPSYNC information)
• Interference lines and the capstan servo is faulty. (part of circuit diagram displayed)
• No functions working although functions illuminated on LCD display. (part of circuit diagram displayed)
• No audio record. intermittently. (+ extract of circuit diagram)
• The speed of the head drum motor varies rhythmically. (VRPSYNC tip from BEAULIEU)
• The supply motor does not run. (part of circuit diagram displayed)
• The appliance records only the colour and not the light. (extract of circuit diagram attached)
• Dark picture. in PB. No picture. after a while (in PB). (with circuit diagram extract)
• With the camera connected to the recorder, the video signal is not switched from the camera to the recorder. (extract of circuit diagram attached)
• Venetian blind effect. Colour intensity is too low. (with circuit diagram extract)
• Take-up motor stops. (+ extract of circuit diagram)
• Drum/head speed fast.
• Appliance does not go to Record-Pause when the camera is connected and switched on and the switch at the front of the camera is in Remote. No clock data (5V) on camera plug pin4.
• The speed of the head drum varies rhythmically.
• Laces up, the capstan stays still, the appliance unlaces again. (+ extract of circuit diagram)
• Under cold conditions the appliance does not display colour. (picture attached)
• Won't Play. Capstan appears to be seized solid.
• Record does not function (only noise).
• High output of the main supply of the AVR. Head drum does not work. (with circuit diagram extract)
• When the recorder is operated with a battery, it switches off after 15 sec. (with circuit diagram extract)
• No camera picture or E/E picture.
• Intermittent colour.
• Only a few or no segments are shown on the display.
• During freeze frame the top third of the picture shows disturbance. The individual picture switching is ok.
• Under-cut voltage adjustment.
• Distorted picture.
• Moire effect in the colour areas. (part of circuit diagram displayed)
• The tape CTL lead is damaged during reverse search, tape loops form on lever No.60 during forward search. (service info for BEAULIEU -VRPSYNC)
• No REW or CUE. (part of circuit diagram displayed)
• Own recording and pre recording shows rhythmic interference lines.
• Snow in picture.
• The DEW indication blinks in the display; it switches off after a short time. Eject functions. (+ extract of circuit diagram)
• No REW. FF works only a sec.
• The connected camera does not work.
• The video signal is not switched through, the board is sensitive to pressure. (+ extract of circuit diagram)
• No initialisation, the head drum runs too fast. (picture attached)
• Shoulder belt slips off. (service info for BEAULIEU -VRPSYNC)
• The picture shakes back and forth horizontally and the appliance meanwhile makes noises.
• The appliance vibrates extremely and there are drive noises during winding.
• No colour. (part of circuit diagram displayed)
• No function. The drive does not initialise it switches off after a short time (part of circuit diagram displayed)
• Sound oscillates. (VRPSYNC tips)
• The cassette compartment does not close (service info for BEAULIEU -VRPSYNC)
• During playback there are white lines in the picture. (part of circuit diagram displayed) (VRPSYNC tip from BEAULIEU)
• No audio. (VRPSYNC tips)
• Head amp peak frequency adjustment. (VRPSYNC tip from BEAULIEU)
• Snow in picture. via tuner. (VRPSYNC tip from BEAULIEU)
• Luminance REC current adjustment.
• PG shifter adjustment. (service info for BEAULIEU -VRPSYNC)
• The capstan motor does not turn, the top stays open. (part of circuit diagram displayed)
• Capstan speed fast.
• During record and playback the capstan runs continuously.
• Display flickers. (+ extract of circuit diagram)
• The compartment does not close.
• No display. (picture attached) (VRPSYNC tip from BEAULIEU)
• The tape hangs out of the cassette during eject. The appliance becomes intermittent during rewind.
• The reel motors occasionally run jerkily. (extract of circuit diagram attached)
• In REW right reel table turns left instead of turning right. IC2501 heats up. (part of circuit diagram displayed)
• No E/E picture, no recording possible when passing through the camera input. (+ extract of circuit diagram)
• The display flickers and the appliance switches off after a short time.
• Set switches from REC to PB.
• Approx 3cm wide interference stripe in top half of picture, only in freeze frame.
• The appliance does not switch on, the display lights, but does not take any functions. (with circuit diagram extract)
• The appliance can be switched on, the DEW indication appears and the appliance switches off.
• Switches off by itself. after a few hours. (part of circuit diagram displayed)
• After playing for a longer time the capstan motor stops and the recorder switches off. (extract of circuit diagram attached)
• The tuner video signal is not fed through the HF-converter or the AV output, PB is ok. (VRPSYNC tips)
• HF-convertor - no HF picture(video output is OK).
• The cassette compartment remains pulled in.
• No drum/head rotation. intermittently. (+ extract of circuit diagram)
• The appliance shows a small "d" and then switches off.
• The left reel table does not brake, rewind is not possible. (with circuit diagram extract)
• Picture VR adjustment.
• No capstan rotation. (with circuit diagram extract)
• The lower part of the picture is snowy (looks like a defective video head). (BEAULIEU - VRPSYNC information)
• No mechanical functions.
• Drum turns but otherwise appliance does not function.