 |
7618453 CR1000 / BLAUPUNKT [Camcorder - VHS normal]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for 7618453 / BLAUPUNKT.
List of fault symptoms:
- No colour, only black and white. (with circuit diagram extract)
- Green lines on the picture or the picture is completely green. (part of circuit diagram displayed)
- Appliance laces in and switches off (without a cassette in the appliance).
- Focus adjustment. (extract of circuit diagram attached)
- Pedestal level adjustment. (+ extract of circuit diagram)
- During EE operation the picture is too weak but the colour is too bright (syncro pulse is too small). Own recording only shows noise, pre recording is ok. (part of circuit diagram displayed)
- The capstan motor does not turn correctly. (+ extract of circuit diagram)
- The cassette unlaces after a short period.
- Audio playback level adjustment.
- Malfunktions of the character generator ie incorrect character size. (part of circuit diagram displayed)
- No colour. (extract of circuit diagram attached)
- Contrast and brightness adjustment.
- Vertical edge balance and CCD bias adjustment. (+ extract of circuit diagram) (7618453 BLAUPUNKT repair tip)
- ALC/AGC adjustment. (extract of circuit diagram attached)
- No colour during recorder playback. (picture attached)
- Viewfinder does not receive signal.
- After a few seconds the appliance switches off. (with circuit diagram extract)
- No cassette eject possible.
- The cassette comp. does not open, the right table does not run, the power LED flashes and the appliance switches off.
- Coloured flecks in the picture.
- R/B separation adjustment. (picture attached)
- Compartment does not close correctly. Flap is a bit forward. (7618453 BLAUPUNKT repair tip)
- No capstan rotation. (+ extract of circuit diagram)
- Records only in blue. (picture attached)
- Connecting a casio mini TV to the camera.
- No drive function and no eject.
- The sound hums during record.
- When zooming back the picture is blurred.
- Vertical size/centering adjustment. (with circuit diagram extract)
- The viewfinder vertical deflection is shock sensitive.
- YH gain adjustment. (+ extract of circuit diagram)
- During PB and record the head motor does not start. Only laces up half of the way, unlaces and switches off. (extract of circuit diagram attached)
- R gain adjustment. (picture attached)
- Beam current adjustment. (part of circuit diagram displayed)
- OSD position adjustment. (extract of circuit diagram attached)
- The camera picture shows no picture.
- During operation with the power supply unit the picture produced on a external monitor is too weak (EE and PB). VTR-TV switching does not function. (+ extract of circuit diagram)
- Playback and EE picture through the power supply are weak, HF playback does not function. (picture attached)
- EVF vertical and horizontal size adjustment. (+ extract of circuit diagram)
- PG shifter adjustment. (part of circuit diagram displayed)
- Camera and record units do not function (+ extract of circuit diagram)
- On play old recordings are erased. (with circuit diagram extract)
- Vertical edge adjustment. (+ extract of circuit diagram)
- Bias light adjustment. (extract of circuit diagram attached)
- Clock cannot be adjusted. (extract of circuit diagram attached)
- If the picture focus is adjusted when set to telephoto, it becomes blurred a the wide angle setting.
- No colour during record. (with circuit diagram extract)
- Picture is bright green. (picture attached)
- Loud drive noises when lacing up.
- Machine is dead. (part of circuit diagram displayed)
- In the camera E/E function, the level of white is too high. (extract of circuit diagram attached)
- When machine is turned on capstan motor runs all the time, then the 9V DC-Voltage on the main PCB is missing. (part of circuit diagram displayed)
- Incorrect colour, blue and red predominate. (part of circuit diagram displayed)
- Target voltage adjustment.
- When the camera is connected to a monitor it functions ok. EVF shows a bright picture with flyback lines.
- The head drum runs too fast.
- Tape Drive does not function. (picture attached)
- No recording with the camera possible, playback is ok. (picture attached)
- The camera unit is defective, no colour. (+ extract of circuit diagram)
- Focus adjustment (EVF). (BLAUPUNKT - 7618453 information)
- Blue picture in viewfinder.
- Tape does not wind back into cassette. (part of circuit diagram displayed)
- No colour during EE operation and own recording, pre recording is ok. (+ extract of circuit diagram)
- Playback picture and sound are missing, record ok. (part of circuit diagram displayed)
- Occasionally there are noise bars at the top of the picture, increases during REW and search.
- Loading motor runs too fast. (extract of circuit diagram attached)
- Cassette compartment does not open and other drive functions also do not function (cassette is in the appliance).
- Undervoltage cutoff adjustment.
- After eject the left reel disk keeps turning. It is possible to finish playing a tape.
- Horizontal size/linearity adjustment. (+ extract of circuit diagram)
- No REC. (part of circuit diagram displayed) (7618453 tips)
- The iris remains closed. (7618453 BLAUPUNKT repair tip)
- The cylinder motor runs fast and the play function does not work.
- Head amp frequency response adjustment. (+ extract of circuit diagram)
- At switch on lacing motor is not reset, then switches off (+ extract of circuit diagram)
- Coloured picture, no possible alignment of the white level. (picture attached)
- No function possible in the recorder unit. Camera operation is ok.
- Tracking position adjustment. (with circuit diagram extract)
- Dynamic focus adjustment. (part of circuit diagram displayed)
- Audio bias level adjustment.
- No record, EE picture and PB of the pre-recorded tape are ok. (extract of circuit diagram attached)
- During EE operation the picture is too weak, but the colour is too strong (synchro pulse is too small). Own recording only shows noise, prerecording is ok. (+ extract of circuit diagram)
- No camera picture and no picture during playback. (with circuit diagram extract)
- No picture in the viewfinder. (picture attached)
- Cassette is jammed inside appliance. (part of circuit diagram displayed)
When BLAUPUNKT 7618453 fails , these symptoms are known and EURAS knows the remedy/solution.
Tips are coming from EURAS customers, workshops and payed technicians from all over the world. BLAUPUNKT 7618453 fails can be better solved. If BLAUPUNKT 7618453 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when BLAUPUNKT 7618453 fails.
|
Additionally to repairtips or service information 7618453 CR1000 is linked to 4 components (IC's and/or transformers) in the Tectra
database, through which you can identify electrical compatibilities (crossreferences) in
appliances.
|
For 7618453 CR1000 there are 9 compatible appliances known and can be listed.
Do you want to see this remedies/cures for repairtips? Register here for the EURAS System Please note: access to the EURAS System can be granted only to professional
technicians/Video/TV/household electronics repair shops which are
authorized for service by a manufacturer, or can prove to be professionally
certified to do repairs on electronic appliances. You will be asked for a
statement and information accordingly during registration.
If you do not qualify as stated above and you have an appliance that needs
technical service, we do recommend you to contact the manufacturer (for
example through his website) or go to a professional TV/household/Video
electronics repair shop close to you.
Already registered? open 7618453 BLAUPUNKT in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
BLAUPUNKT
tech tips
Last updated: 19. Nov 2008 07:03:55 MET, doccode ISO9002AS168EKA200805C EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|