EURAS System
    EURAS worldwideeuras.com    
EURAS System

TV51821A 12843 / CINEX [TV]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for TV51821A / CINEX.

List of fault symptoms:
  • Picture flicker for a few seconds when it comes up then appliance goes into standby.
  • No TXT. (TV51821A tip from CINEX)
  • No OSD. No TXT. (CINEX - TV51821A information)
  • No picture, audio OK, TXT OK, TXT mixed with picture OK.
  • Unable to enter tuning mode.
  • No channel store. Picture size varies.
  • Switches off occasionally or no switch-on. Remains in standby.
  • No power.
  • Ticks, standby display blinks.
  • Picture jitters vertically on the picture edges.
  • Poor focus. Arcing across focus spark gap on CRT base PCB.
  • Dead.
  • Thin horizontal black lines on upper half picture. Poor horizontal linearity. (TV51821A tips)
  • Picture vertically serrated.
  • Horizontal output stage drive fails.
  • No audio. No sound option in main menu.
  • Changes channels intermittently.
  • No picture. intermittently.
  • Horizontal collapse. E/W fault.
  • No start-up.
  • Coloured spots on the screen.
  • No line drive at start-up. Line drive starts after a while and picture appears with reduced vertical size.
  • Tripping.
  • Incorrect horizontal size.
  • Chirps.
  • No line drive. intermittently.
  • No functions.
  • E/W fault.
  • Enter service mode.
  • Picture is compressed and bright line in the middle of the picture.
  • Only a blinking vertical strip in the centre.
  • Distorted picture.
  • Reduced vertical and horizontal size.
  • Vertical jitter.
  • No picture. Audio OK .
  • Picture jitters. (TV51821A CINEX repair tip)
  • Blows TD02 (BUH515D) at start-up.
  • Pincushion distortion. E/W fault.
  • All stations are just a bit mistuned, sometimes no sound on some channels.
  • Picture and sound drop out for a short time, then program display and stereo OSD appear.
  • Pulse switching can be heard at switch on.
  • Blank raster.
  • Disable child lock.
  • No vertical deflection on the upper half of screen. Bright line in the middle.
  • Shuts down. after a while. LED is red .
  • Vertical foldover. at top.
  • Concaved picture.
  • Black bar. at top.
  • E/W changes by itself depending on picture content.
  • No picture.
  • No start-up. Standby LED lit .
  • Purity spot in TXT after a while.

If CINEX TV51821A fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when CINEX TV51821A fails.


Additionally to repairtips or service information TV51821A 12843 is linked to 50 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into TV51821A 12843).

EURAS system also knows 195 appliances having the same chassis as TV51821A 12843 and can easily list them.

In the repair discussion pinboard for TV51821A 12843 there are 49 replies to questions asked about 64 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for TV51821A from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional household electronics repair shops/Video/technicians/TV which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional TV/household/Video electronics repair shop close to you.

Already registered? open TV51821A CINEX in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> CINEX tech tips  











Last updated: 15. Oct 2008 21:00:09 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.