EURAS System
    EURAS worldwideeuras.com    
EURAS System

CTV286VT / CLATRONIC [TV]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CTV286VT / CLATRONIC.

List of fault symptoms:
  • Switches to protection mode. after start-up.
  • No HV.
  • Switches off by itself. after a while.
  • No start-up.
  • No functions. Standby LED does not light.
  • Turns off after a while and can be restarted. If fault PSU turns off and standby LED does not flash.
  • PSU only attempts to start.
  • No picture. after a while. Audio OK . (CTV286VT tips)
  • Picture shifted 3cm to the left.
  • PSU pulsates after switch on, also if loaded with incandescent lamp. Standby mode OK.
  • Red LED does not light up.
  • Horizontal picture deflection is distorted (with vertical movements on left and right sides of screen). Mains hum interference from loudspeaker. Sometimes does not start up instantly.
  • PSU trips for 30 secs then starts.
  • Dead. Standby LED does not light.
  • No 12V at IC11 (TDA8138A).
  • No HV. after start-up. (CLATRONIC - CTV286VT information)
  • Black stripes in right picture side, and picture has shifted to right.
  • PSU ticking. Standby LED flashes .
  • Vertical line an right side of picture. (CTV286VT CLATRONIC repair tip)
  • BU808 in line output stage heats and fails.
  • Shuts down. after a few hours.
  • Line output transistor (BU808DF) blows.
  • No audio.
  • After 30 minutes switches off completely. After cooling off period, appliance can be started again.
  • Pulsates 4 times per sec. after switch on. Red LED pulsates in synch.
  • No vertical deflection.
  • Dead.
  • No picture.
  • No start up. LED goes out after RC is activated.
  • Picture is shifted to the left.
  • No horizontal and vertical sync. Intermittent sound.
  • Shuts down (after warm-up).
  • Power supply pulsates after switch on, even when connected to a light bulb. Standby OK.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. CLATRONIC CTV286VT fails can be better solved.

If CLATRONIC CTV286VT fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when CLATRONIC CTV286VT fails.


Additionally to repairtips or service information CTV286VT is linked to 1 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CTV286VT ).

EURAS system also knows 18 appliances having the same chassis as CTV286VT and can easily list them.

In the repair discussion pinboard for CTV286VT there are 6 replies to questions asked about 3 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CTV286VT from EURAS technicians or other users.

Do want to see this remedies/cures for repairtips?   Register here for the EURAS System

Already registered? open CTV286VT CLATRONIC in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> CLATRONIC tech tips  


(C) EURAS International Ltd.









Last updated: 18. Aug 2008 16:33:06 MET, doccode ISO9002AS168EKA200805C [cachelite] EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany. All rights reserved, EURAS database V2.0 (C) 2002-2008. All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.