EURAS System
    EURAS worldwideeuras.com    
EURAS System

PCXBVPC / DIGITAL [Monitors]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for PCXBVPC / DIGITAL.

List of fault symptoms:
  • Horizontal synchronisation (3452).
  • B+ supply voltage, power saving, EHT.
  • S/C in the line end stage. (PCXBVPC tips)
  • Stuck in standby.
  • High-voltage EHT (3625).
  • High voltage EHT adjustment. (PCXBVPC DIGITAL repair tip)
  • Specifications.
  • Picture disappears (loose contact).
  • Line frequency limit adjustment (3444).
  • PSU switches off immediately. S/C after earth at all pins of the BU2525.
  • Adjustment of pre-size for horizontal width.
  • Ghosting on video.
  • Adjustment of pre-size (3648-H, 3454-V).
  • Horizontal sync adjustment.
  • Adjustment of cut-off.
  • Picture geometry setting (factory pre-set modes). (service info for DIGITAL -PCXBVPC)
  • After a few secs in VSA resolution switches into power safe. With higher resolutions it runs perfectly.
  • No picture.
  • Raster is lost.
  • Dead except power LED.
  • Correct picture for a short time then switches to power safe.
  • White D adjustment.
  • Dead.
  • Raster shakes. Noisy picture.
  • High failure rate capacitors.
  • B+ supply voltage (3143), power saving (3256, +12V adj), EHT (3625).
  • Adjustment of pre-size for vertical size.
  • Focus setting.
  • Line frequency limit adjustment.

With help of this list a solution is found often when DIGITAL PCXBVPC fails.


Additionally to repairtips or service information PCXBVPC is linked to 23 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into PCXBVPC ).

EURAS system also knows 31 appliances having the same chassis as PCXBVPC and can easily list them.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional technicians/household electronics repair shops/Video/TV which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional household/Video/TV electronics repair shop close to you.

Already registered? open PCXBVPC DIGITAL in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> DIGITAL tech tips  











Last updated: 15. Oct 2008 23:24:13 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.