euras.com

F10 / FORMENTI [TV (Standard) (chassis)]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for F10 / FORMENTI.

List of fault symptoms:

PSU only attempts to start.
BU808 in line output stage heats and fails.
Picture shifted 3cm to the left.
Line output transistor (BU808DF) blows.
No vertical deflection.
No picture. after a while. Audio OK .
Dead. Standby LED does not light.
No functions. Standby LED does not light.
PSU trips for 30 secs then starts.
Power supply pulsates after switch on, even when connected to a light bulb. Standby OK.
No HV. after start-up.
PSU ticking. Standby LED flashes .
Dead.
Picture is shifted to the left.
No start up. LED goes out after RC is activated.
Shuts down. after a few hours.
Shuts down (after warm-up). (service info for FORMENTI -F10)
Turns off after a while and can be restarted. If fault PSU turns off and standby LED does not flash.
Switches off by itself. after a while.
No audio.
No picture. (F10 tip from FORMENTI)
Black stripes in right picture side, and picture has shifted to right.
PSU pulsates after switch on, also if loaded with incandescent lamp. Standby mode OK. (service info for FORMENTI -F10)
Pulsates 4 times per sec. after switch on. Red LED pulsates in synch.
Red LED does not light up.
No HV.
Switches to protection mode. after start-up.
No start-up. (F10 tips)
Vertical line an right side of picture.
No horizontal and vertical sync. Intermittent sound.
Horizontal picture deflection is distorted (with vertical movements on left and right sides of screen). Mains hum interference from loudspeaker. Sometimes does not start up instantly.
After 30 minutes switches off completely. After cooling off period, appliance can be started again.
No 12V at IC11 (TDA8138A).

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. FORMENTI F10 fails can be better solved.

If FORMENTI F10 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when FORMENTI F10 fails.

Additionally to repairtips or service information F10 is linked to 1 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.

For F10 there are 3 compatible appliances known and can be listed.

In the repair discussion pinboard for F10 there are 6 replies to questions asked about 3 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for F10 from EURAS technicians or other users.

You can display a list with all appliances that have build in the F10/FORMENTI chassis.

Do you want to see this remedies/cures for repairtips? Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/technicians/TV/household electronics repair shops which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional TV/Video/household electronics repair shop close to you.

Already registered? open F10 FORMENTI in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |

Back to EURAS Homepage >> All manufacturers >> FORMENTI tech tips

Last updated: 20. Nov 2008 08:59:17 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.