ESR1500 / FTE [Sat /TV reception module]

• Setting the audio muting circuit.
• No picture. No audio.
• No SAT reception. No test picture.
• Setting the AF gain (on the right).
• Setting the mechanical polariser (Skew adjustment).
• Setting the AFC/AFT.
• Setting the VCO frequency (left channel).
• No switch on - standby display lights up.
• If program is adjusted, picture is ok. But as soon as it is stored with STORE, white dropout appears.
• When connecting with d-sub to Scart of the Premiere G2 decoder, interference in the normal SAT programmes, as if the signal were running via the decoder.
• Standby display does not go off. Reception is not possible. Display shows changes.
• No function. Display OK.
• Setting the video deviation 16MHz.
• Audio hisses, is distorted. Poor reception on some frequencies.
• Adjustment of the AF gain (on the left).
• Setting the VCO frequency (right channel).
• No picture.
• Setting the video deviation 25MHz.
• Appliance is intermittent after about 30 min. The operation LED lights continuously and shows strange symbols.
• No functions. Display OK .
• Setting the preselection (audio on the right).
• No sound in the left channel.
• Adjustment of the preselection (audio on the left).
• Adjusting the FM detector (audio on the left).
• Setting the FM detector (audio on the right).
• Distorted audio.
• Setting the base band signal.
• No function on screen. Indication on display is present.
• Adjusting the LNC switchover voltage.
• If the channel is set, picture ok. However as soon as it is stored with STORE, white drop outs.
• No functions.
• Adjusting the PLL frequency.
• No sound in the right channel.
• Sound hisses and is distorted. Poor reception on some frequencies.