C1650H / GEC [TV]

• Intermittently appliance switches off.
• Too much width.
• Low A1s.
• Distorted audio.
• Unstable frame hold control and constantly needs adjusting or incorrect frame speed.
• Picture and sound are missing, raster and sound noisy.
• Picture and sound are missing, raster and sound noisy. (C1650H tip from GEC)
• Excessive green.
• Sound and picture are missing, EHT ok.
• Buzz in audio.
• Colour flashes.
• No start-up.
• Cramped or stretched at top; cramped, frame creeping or foldover at bottom.
• Picture tube not lit.
• No vertical deflection. (service info for GEC -C1650H)
• Faint colour when higher channels is selected.
• No audio.
• No colour.
• Brightness fault.
• EHT brushes or arcs.
• The picture was overbright.
• Frame oscillator does not function.
• Picture and sound are missing, raster and sound are noisy.
• Bright picture.
• Raster is overbright and left hand side of screen has stripes.
• Reduced horizontal size.
• Poor picture quality, smearing, milkiness or glistening on peak whites. (C1650H GEC repair tip)
• Picture is grainy and sound noisy.
• Picture and sound are missing, EHT ok. (C1650H tips)
• Ghosting effect.
• Picture is very dark, A1 is low. (GEC - C1650H information)
• Goes to standby from cold.
• Dead. PSU squeals.
• Unstable frame hold control which constantly needs adjusting or incorrect frame speed.
• Low gain.
• Tuning drifts.
• Reduced vertical size. (C1650H tips)
• No blue.
• AGC problems.
• Excessive blue.
• Bright raster especially on right hand side. Stripes.
• Frame synchronisation poor.
• Inadequate raster and no signal.
• Distorted audio.
• Stuck in standby.
• No audio.
• Cramped or stretched at top; cramped, frame creep or foldover at bottom.
• Brightness uncontrollable, shaded picture dark to light.
• Raster is bright with flyback lines.
• Picture is grainy and sound noisy. (C1650H GEC repair tip)
• EHT is missing, line timebase ok.
• Incorrect line speed or unstable control, possibly intermittent. (C1650H tip from GEC)
• Top of screen has field cramp.
• Line synchronisation is missing, intermittently missing or line hold critical.
• Picture is missing, raster and sound ok.
• Intermittent chroma.
• Intermittent horizontal and shaky picture.
• Ballooning effect.
• Synchronisation is missing or intermittently missing.
• Excessive red.
• Speaker problems.
• Hanover bars.
• Colours float.
• Red, green or blue luminance signal is missing.
• Dead.
• Bars in picture.
• No RGB.
• Vertical collapse. (C1650H tips)
• No green.
• Appliance comes on in standby only.
• No red. (C1650H GEC repair tip)
• Flickering picture. (GEC - C1650H information)
• Tuning drifts.
• Dark picture intermittently. CRT heaters lit.
• Vertical jitter.