C2217 / GEC [TV]

• Jagged verticals.
• Ballooning effect.
• EHT is missing, line timebase ok. (service info for GEC -C2217)
• Brightness fault.
• EHT missing, line timebase ok.
• Tube heaters do not light up.
• Picture appears grainy and noisy sound.
• Degauss circuitry does not function.
• No blue.
• Reduced vertical size. (service info for GEC -C2217)
• Bright raster.
• Synchronisation is missing or lost intermittently.
• Ghosting effect.
• No red. (GEC - C2217 information)
• No red, green or blue luminance signal. (C2217 tips)
• Frame collapse or intermittent frame collapse.
• No blue luminance signal.
• Frame collapse or intermittent frame collapse. (GEC - C2217 information)
• Dead.
• Focus problems.
• No audio. No picture.
• Jagged verticals.
• Reduced vertical size.
• Poor picture quality, smearing, milkiness, glistening on peak whites or insufficient brightness.
• Striations.
• Reduced vertical size.
• Raster is missing or dark, sound ok.
• No audio. No picture.
• Picture appears grainy and sound noisy.
• EHT brushes or arcs.
• When appliance is warm, the verticals at the edge of the picture become distorted.
• No red, green or blue luminance signal.
• Synchronisation is missing or lost intermittently. (C2217 tips)
• Jagged verticals.
• Excessive red.
• Insufficient frame synchronisation.
• No red, green or blue luminance signal. (C2217 tips)
• Synchronisation is missing or lost intermittently.
• CRT heaters do not light up.
• Frame hold control unstable and constantly needs adjusting or incorrect frame speed.
• Vertical jitter.
• Brightness fault.
• Ballooning effect.
• Frame collapse or intermittent frame collapse.
• Brightness fault.
• Static hum.
• When appliance is warm, the verticals at the edge of the picture become distorted.
• Blue luminance signal is missing.
• Power output transistor TR502 (BU126) keeps failing.
• Unstable frame hold control and constantly needs adjusting, or incorrect frame speed. (service info for GEC -C2217)
• Frame collapse or intermittent frame collapse.
• Frame synchronisation poor.
• No audio. No picture.
• Degauss circuitry does not function. (service info for GEC -C2217)
• Vertical jitter.
• Raster is blank, sound ok.
• Red luminance signal is missing.
• Incorrect line speed or unstable control.
• Intercarrier buzzing on sound. (C2217 GEC repair tip)
• Frame synchronisation poor.
• No red, green or blue luminance signal.
• Poor picture quality, smearing, milkiness, glistening on peak whites or insufficient brightness.
• No audio. No picture.
• Line synchronisation missing, intermittently missing or line hold critical.
• Degauss circuitry does not function.
• EHT is missing, line timebase ok.
• Reduced vertical size.
• No audio. No picture.
• Frame synchronisation poor.
• No colour.
• Degauss circuitry does not function.
• Ballooning effect. (service info for GEC -C2217)
• To increase dependence of IC351 (TDA1270Q).
• Power output transistor TR502 (BU126) keeps failing.
• No audio. No picture.
• Dead.
• Blue luminance signal is missing.
• CRT heaters do not light up.
• Picture appears grainy and sound noisy.
• No green.
• EHT brushes or arcs.
• Bright raster with flyback lines. (C2217 GEC repair tip)
• Speaker problems. (C2217 GEC repair tip)
• Unstable frame hold control and constantly needs adjusting, or incorrect frame speed.
• Degauss circuitry does not function.
• Dead.
• When appliance is warm, the verticals at the edge of the picture become distorted. (service info for GEC -C2217)
• Ghosting effect.
• No audio. No picture.
• Unstable frame hold control and constantly needs adjusting or incorrect frame speed.
• Reduced vertical size.
• EHT brushes or arcs.
• Static hum.
• Brightness fault.
• Static hum.
• Horizontal bars move up and down the screen.
• Bend on verticals.
• Flashover ruins IC181 (TBA800).
• Red luminance signal is missing.
• Picture appears grainy and sound noisy.
• Striations.
• Excessive blue.
• No audio. No picture.
• Synchronisation is missing or lost intermittently.
• Vertical jitter.
• Ballooning effect.
• Incorrect line speed or unstable control.
• EHT brushes or arcs.
• Picture appears grainy and sound noisy.
• Frame synchronisation poor.
• Incorrect line speed or unstable control.
• Green luminance signal is missing.
• Degauss circuitry does not function.
• Excessive green.
• Red luminance signal is missing.
• No audio. No picture. (service info for GEC -C2217)
• Distorted audio.
• EHT is missing, line timebase ok. (C2217 tips)
• Poor picture quality, smearing, milkiness, glistening peak whites or insufficient brightness.
• Blue luminance signal is missing.
• EHT Brushes or arcs.
• Green luminance signal is missing.
• CRT heaters do not light up.
• Brightness fault.
• Dead. (C2217 GEC repair tip)
• Vertical jitter.
• Horizontal bars move up and down the screen.
• No audio. No picture.
• Poor picture quality, smearing, milkiness, glistening on peak white or insufficient brightness.
• Dead.
• Line synchronisation is missing or intermittently missing or line hold critical.
• Bend on verticals.
• Raster is missing or dark, sound ok.
• Incorrect line speed or unstable control.
• Horizontal bars move up and down the screen.
• Jagged verticals.
• Bend on verticals.
• Power output transistor TR502 (BU126) keeps failing.
• AGC problems.
• Horizontal bars move up and down the screen. (C2217 tip from GEC)
• Unstable frame hold control and constantly needs adjusting, or incorrect frame speed.
• Frame collapse or intermittent frame collapse.
• Raster is missing or dark, sound ok.
• CRT heaters do not light up.
• Incorrect line speed or unstable control.
• Line synchronisation missing, intermittently missing or line hold critical.
• Bend on verticals.
• When appliance is warm, the verticals at the edge of the picture become distorted.
• Green luminance signal is missing.
• Degauss circuitry does not function.
• Colour floats.
• Ghosting effect.
• Ghosting effect.
• Static hum.
• Vertical jitter.
• Line synchronisation is missing or intermittently missing or line hold critical.
• Synchronisation is missing or intermittently missing.
• Picture grainy and sound noisy.
• Line synchronisation is missing, intermittent or line hold critical.
• Striations.
• Focus problems.
• EHT is missing, line timebase ok.
• Focus problems.
• Jagged verticals.
• Dead.
• No green luminance signal.
• Ballooning effect.
• Override colour killer.
• Striations.
• Focus problems.
• Raster is missing or dark, sound ok.
• Focus problems. (C2217 tip from GEC)
• No audio.
• Ghosting effect.
• Power output transistor TR502 (BU126) keeps failing. (C2217 tips)
• Static hum.
• Poor picture quality, smearing, milkiness, glistening on peak whites or insufficient brightness.