EURAS System
    EURAS worldwideeuras.com    
EURAS System

IRCI5400 / HUMAX [DVB-S receiver (digital)]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for IRCI5400 / HUMAX.

List of fault symptoms:
  • No function or LED flashes.
  • Display flashes every 0.5secs.
  • No reception. Chirping.
  • Display switches on and off. PSU pulsates.
  • Dead, strange noise audible.
  • Briefly displays software version, then 3 points light up at the receiver.
  • Stuck in standby.
  • Fuse blows when switching on.
  • PSU oscillates at start up and green LEDs light up briefly.
  • No functions. (IRCI5400 tips)
  • Displays "poor or no signal".
  • PSU pulsates.
  • Dead. Switches on and off rhythmically.
  • Cycles on/off. intermittently.
  • Switches sporadically on from standby.
  • Display flashes irregularly.
  • No start-up.
  • Dead (after power failure).
  • Signal bar quality changing.
  • Slow start-up. Display flashes .
  • Dead. Appliance needs a few minutes until it works, and display and OSD menu are visible.
  • Display flahes faintly.
  • PSU pumps. Red LED flickers.
  • Normal start-up, until programme display appears, then short whistling from coil L50 near card connector. (IRCI5400 HUMAX repair tip)
  • No start-up. Three LEDs flashing.
  • No functions, display blinks slightly.
  • H2.08 in the display after switch on. then E-IC is displayed.
  • No function. Display flashes briefly during switch on.
  • Dead. PSU start-up audible for a short time.
  • Dead. PSU switches audibly on.
  • Display goes out and no switch on possible when switching to standby after some time
  • How to check PSU.
  • Error message E-AC in the display after switch on.
  • Dead.
  • Shuts down (intermittently).
  • Audible oscillation from SMPS (approx. 6kHz).
  • PSU pulsates. No display.

If HUMAX IRCI5400 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when HUMAX IRCI5400 fails.


Additionally to repairtips or service information IRCI5400 is linked to 1 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


For IRCI5400 there are 3 compatible appliances known and can be listed.


In the repair discussion pinboard for IRCI5400 there are 20 replies to questions asked about 6 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for IRCI5400 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional household electronics repair shops/TV/Video/technicians which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional household/TV/Video electronics repair shop close to you.

Already registered? open IRCI5400 HUMAX in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> HUMAX tech tips  











Last updated: 20. Nov 2008 07:24:26 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.