EURAS System
   EURAS worldwideeuras.com    
EURAS System

1154 / MAXIM [LCD/TFT TV]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for 1154 / MAXIM.

List of fault symptoms:
  • LED flashes after changing the 1000uF capacitor.
  • No start-up. LED flashes once then 42 times.
  • Trips after approx. 15 minutes. Standby LED flashes.
  • Stuck in standby.
  • Backlight flashes on then off. Audio OK. If centre of PSU is heated backlight starts up. (service info for MAXIM -1154)
  • No start-up. Standby LED flashes green then red 5 times. (MAXIM - 1154 information)
  • Red LED flashes.
  • Dead. Red LED blinks.
  • No start-up. Standby LED flashes .
  • Comes on for a short time.
  • Menu display pemanently on.
  • No audio. No picture. LED flickers .
  • PSU fault.
  • Tripping.
  • No function. LED blinks once green and then 6 times red.
  • PSU blown.
  • No audio. No picture. No OSD. Backlight OK.
  • Poor RF output and no picture, only audio via SCART.
  • Shuts down intermittently. LED flashes 8 times.
  • No start-up. Red LED flashes.
  • FET 401 blown.
  • No backlight after a few minutes. Audio OK.
  • Dead.
  • Dead. LED blinks .
  • No function. Lightning. (service info for MAXIM -1154)
  • No start-up. LED flashes once then 46 times repeatedly.
  • No picture.
  • No start-up. LED blinks .
  • Dead. Standby LED flashes .
  • Backlight flashing. LED flashing different colour.
  • Stuck in standby. Red LED blinks. (1154 tips)
  • Enter service mode.
  • No start-up. Red LED blinks at start-up.
  • Low 24V rail to inverter board. (service info for MAXIM -1154)
  • Standby LED flashes green once then 5 times red,after start up, then repeats the LED flashes cycle. (1154 MAXIM repair tip)
  • Intermittently dead. LED flashes red, orange and green.
  • Main fuse blown. (1154 tip from MAXIM)
  • No functions. (MAXIM - 1154 information)

With help of this list a solution is found often when MAXIM 1154 fails.


Additionally to repairtips or service information 1154 is linked to 30 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into 1154 ).

EURAS system also knows 33 appliances having the same chassis as 1154 and can easily list them.

For 1154 there are 2 compatible appliances known and can be listed.


In the repair discussion pinboard for 1154 there are 125 replies to questions asked about 96 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for 1154 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/technicians/household electronics repair shops/TV which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional household/Video/TV electronics repair shop close to you.

Already registered? open 1154 MAXIM in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> MAXIM tech tips  












Last updated: 11. Oct 2008 01:05:07 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.