EURAS System
    EURAS worldwideeuras.com    
EURAS System

2200 / PACE [Sat /TV reception module]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for 2200 / PACE.

List of fault symptoms:
  • After 1-2 hours, most channels produce "no signal received" message.
  • Remote control not working, works OK from front panel buttons.
  • Picture freezes.
  • "No satellite signal received" message all the time.
  • Does not read viewing card.
  • Dead. Lightning damage.
  • Intermittently freezes with horizontal polarised channels. No satellite signal message on display.
  • Modem fault after a thunderstorm.
  • Standby LNB voltage pulsates slowly.
  • Audio breaks up. Picture freezes. Symptom repeats.
  • No RC functions.
  • Does not power up.
  • Dead. (service info for PACE -2200)
  • "No signal displayed". No 22KHz tone. (PACE - 2200 information)
  • Stuck in standby.
  • No output from UHF modulator. No RF loop-through.
  • How to access INSTALLER SETUP menu of options.
  • No green.
  • Picture freezes. intermittently.
  • Digibox tripping
  • No LNB supply
  • Picture freezes after warm-up.
  • No signal being received.
  • Slow channel change.
  • Digibox is dead

When PACE 2200 fails , these symptoms are known and EURAS knows the remedy/solution.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. PACE 2200 fails can be better solved.

If PACE 2200 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when PACE 2200 fails.

In the repair discussion pinboard for 2200 there are 4 replies to questions asked about 2 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for 2200 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/TV/technicians/household electronics repair shops which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/TV/household electronics repair shop close to you.

Already registered? open 2200 PACE in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> PACE tech tips  











Last updated: 07. Oct 2008 04:41:58 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.