EURAS System
    EURAS worldwideeuras.com    
EURAS System

MSS300 / PACE [Sat /TV reception module]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for MSS300 / PACE.

List of fault symptoms:
  • "LNB short" message through know good feed.
  • Restore factory settings.
  • Partial horizontal streaks as if scrambled.
  • No decoder message and intermittent picture scrambling.
  • Picture drifts. Menu and channel idents OK. Picture from VCR scart OK.
  • PSU chirps and whistles.
  • Strong noise. Sound drop outs
  • PSU ticks. No left or right hand side audio output.
  • No response from RC control handset.
  • Dead, just ticking.
  • Very low LNB voltage. Power supply can be heard starting up.
  • Horizontal streaks on picture. PSU whistles.
  • No picture.
  • Stuck in standby.
  • Menu background colour changes to black and white.
  • Stripe disturbance and sound is interrupted.
  • No display at power-up for approx 30 seconds.
  • No functions. No display.
  • Fading fluorescent display.
  • Rubbish in display. Locks up.
  • Decoder fails when warm.
  • Swirling white dashed lines on picture.
  • No LNB voltage.
  • Vertical white lines on decoded channels.
  • Remains in vertical polarity.
  • "Card Invalid" message on picture.
  • Failure of D9.
  • Ok for first 30 mins then channel idents drift, decoder messages disappear and no decoding.
  • Blown fuse.
  • PSU ticks.
  • 50mm wide grain bar down centre of screen on some D2MAC programmes, when positioner is connected between receiver and decoder.
  • Stuck in standby with zeros in display. (PACE - MSS300 information)
  • Picture has retrace lines.
  • Blue screen. "NO SIGNAL" message on all channels.
  • After power failure no display function, otherwise perfect function.
  • No functions with external decoder.
  • Dead.
  • "LNB Short" message appears. (MSS300 tips)
  • No display.
  • No signal on blue background; audio muted. When blue background turned off, audio OK.
  • Card flap does not open when release button pressed.
  • No RF output.
  • No decoder messages. No on-screen channel idents. Tuning menu drifts to left.
  • Blue picture.
  • Blue screen with "no signal message".
  • Very poor picture.
  • No audio.
  • Picture is monochrome and rolling. (MSS300 PACE repair tip)
  • No decoder messages.
  • Intermittent scramble.
  • Lines in picture.
  • U1 S/C.
  • No on screen menu. Irregular characters in varying places on screen, or blank raster. LED flashing to indicate receiver in "MENU" mode.

When PACE MSS300 fails , these symptoms are known and EURAS knows the remedy/solution.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. PACE MSS300 fails can be better solved.

If PACE MSS300 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when PACE MSS300 fails.

In the repair discussion pinboard for MSS300 there are 3 replies to questions asked about 1 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for MSS300 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/technicians/household electronics repair shops/TV which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/household/TV electronics repair shop close to you.

Already registered? open MSS300 PACE in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> PACE tech tips  











Last updated: 16. Oct 2008 05:53:27 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.