EURAS System
    EURAS worldwideeuras.com    
EURAS System

2892S / PROLINE [TV 70-74 (66-70) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for 2892S / PROLINE.

List of fault symptoms:
  • Switches to standby when started with RC.
  • Horizontal foldover.
  • No channels.
  • No picture. Flyback lines. Audio OK .
  • No start-up. Green LED flashes .
  • Arcing HV.
  • Switches to standby. after start-up. Red LED blinks.
  • Shuts down. after start-up.
  • Line output transistor fails repeatedly.
  • No audio in NICAM.
  • Annoying noise in standby.
  • No vertical deflection.
  • Reduced vertical and horizontal size. intermittently.
  • Ticking noise. in standby.
  • Snow in picture.
  • Black screen.
  • Annoying noise from PSU. Functions OK.
  • Reduced horizontal size.
  • Vertical roll.
  • Dead. LED blinks .
  • No audio.
  • No OSD.
  • No audio in SECAM L MONO.
  • Dark picture.
  • Low audio in MONO.
  • No RC functions.
  • No start-up from standby with RC.
  • No start-up.
  • Spot in the centre of screen.
  • Line output transistor fails repeatedly. after a few minutes.
  • Switches off by itself. in standby (intermittently). (PROLINE - 2892S information)
  • Vertical foldover.
  • Vertical line tearing.
  • Bright picture.
  • Faulty OSD.
  • No tuning.
  • White screen. Flyback lines.
  • No colour.
  • Millky picture. Raster OK.
  • Switches to standby. after start-up.
  • TXT fault.
  • No picture in PIP mode.
  • No screen adjustment.
  • Slow start-up. Pulsating picture appears then switches off. (2892S PROLINE repair tip)
  • Dead.
  • Enter service mode. (2892S PROLINE repair tip)
  • Line output voltage at 60V approx.
  • No start-up. Power LED lit for a second then disappears.
  • Dead.
  • PSU pulsates. No start-up from standby.
  • No E/W correction.
  • Dead. Standby LED lit .
  • HV flashover at FBT TR602.
  • No horizontal deflection.
  • At start-up LED switches to green then goes to standby and LED blinks red.
  • Blue picture in SECAM.
  • No start-up. intermittently.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. PROLINE 2892S fails can be better solved.

If PROLINE 2892S fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when PROLINE 2892S fails.


Additionally to repairtips or service information 2892S is linked to 29 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into 2892S ).

EURAS system also knows 35 appliances having the same chassis as 2892S and can easily list them.

For 2892S there are 8 compatible appliances known and can be listed.


In the repair discussion pinboard for 2892S there are 25 replies to questions asked about 15 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for 2892S from EURAS technicians or other users.

Do want to see this remedies/cures for repairtips?   Register here for the EURAS System

Already registered? open 2892S PROLINE in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> PROLINE tech tips  


(C) EURAS International Ltd.









Last updated: 04. Sep 2008 14:11:29 MET, doccode ISO9002AS168EKA200805C [cachelite] EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany. All rights reserved, EURAS database V2.0 (C) 2002-2008. All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.