EV400F / SABA [Video recorder - VHS HiFi]

• No display. No audio. (SABA - EV400F information)
• FB044 is defective.
• Drops out in PB after loading.
• No REW. No FF.
• Searches for channels continuously.
• Primary PSU does not oscillate.
• Tape breaks at end of REW.
• Option codes.
• No display.
• No function. Cassette is loaded and drum turns correctly. (SABA - EV400F information)
• No REW and FF at certain tape positions. (SABA - EV400F information)
• Saturated picture.
• No start-up. No functions.
• Zener diode DP067 (6.2V; MA2062A) has O/C.
• No REW and remaining time search. No REC. PB OK.
• Stops during PB, especially in LP.
• Cassette is laced up in appliance and can not be removed. Child lock is activated. (SABA - EV400F information)
• Does not load tape.
• Decoder constantly or intermittently on display.
• Shuts down. in PB. Loads OK. .
• Loads tape then ejects immediately.
• No display or too dark.
• Poor drum servo.
• 16:9 detection despite 4:3 programme from VCR.
• 12V missing.
• Accepts tapes while making strange noises.
• Sound warbles in PB.
• No start-up.
• Turns off after approx 3 sec in Play or FF/REW mode.
• Occasionally IR receiver does not function.
• Mutes 1 and 2 active. (service info for SABA -EV400F)
• Does not accept tape. (EV400F tips)
• Interference in tuner picture by some programs.
• In REW, appliance goes to STOP after approx 5 secs. During REC appliance also goes to STOP.
• Intermittently stops. No RC functions.
• Excessive height of OSD.
• Blue lines in PB.
• No picture (in PB).
• Dead.
• Does not load the cassette or cassette is loaded once out of twice only after mains reset.
• Display indication in Italian. (EV400F tips)
• Retracts cassette too slowly and ejects it again.
• Shows a cassette is present when there is none or random functions.
• No front panel function. RC OK. (SABA - EV400F information)
• Enter service mode.
• TP020 becomes defective.
• Dark picture.
• VCR runs for a short time then stops during PLAY.
• PSU failure.
• No eject.
• Whistling from PSU.
• No OSD.
• No drum/head rotation. (EV400F tips)
• No colour.
• Output channel adjustment.
• No display. in standby. LED is red .
• No functions (intermittently).
• Poor PAL/SECAM detection.
• Picture size varies with picture content. (service info for SABA -EV400F)
• Moire only on one channel.