EV620 / SABA [Video recorder - VHS HiFi]

• No picture.
• Operation info: Showview Identity numbers. (SABA - EV620 information)
• Cassette presence permanently displayed.
• Poor picture. Picture rolls.
• Loads tape, goes to FF for 2 secs then switches to standby. When started up again, appliance stays in FF for a sec then stops. Tape is released by reverse half rotation of right table. No standby.
• Does not switch on. Two clicks can be heard from PSU but no functions.
• Poor eject of the cassette.
• Unsynchronised menu in line and frame with Canal Plus decrypted by the VCR which is in standby.
• Black smears on picture during REC and PB. (EV620 tips)
• Black line in S-VHS mode.
• Unstable picture. in PB.
• Cassette compartment does not retract, end position is not reached during eject.
• Cassette compartment tries to load a tape by forcing at switch on then after several moments tries to eject it. Keeps indicating tape presence.
• How to set factory mode - how to empty memory.
• Tape is retracted, drum turns, tape advances for 15 seconds and then appliance switches to standby.
• Eats tape.
• Inverted picture. (service info for SABA -EV620)
• No functions.
• Menu language. (service info for SABA -EV620)
• Unlaces constantly after loading cassette. (service info for SABA -EV620)
• Poor audio. Tape is damaged.
• Memory loss. (EV620 SABA repair tip)
• Dead.
• Loads tape then ejects immediately. (SABA - EV620 information)
• Enter service mode.
• Poor operation of the quick function button.
• Does not load cassette, only if it is pushed. When ejecting cassette becomes stuck half way.
• Appliance jams. All the segments of the display are lit up.
• Dark display.
• Distorted audio.
• Dead. Dark or very poor display.
• Cassette is retracted again after being ejected. Appliance switches off.
• Clock shifts a few mins each month.
• Modification: VR7021 and VR7041.
• Brakes fault. (EV620 tips)
• No memory.
• Doesn't accept cassette. No mechanism reaction.
• Destroys upper part of tape.
• Damaged tape in upper part.
• No display.
• Capstan does not rotate and appliance goes into safety when hot.
• No display. after a few seconds.
• PB fault. Reads a few seconds and then stops. No FF.
• Capstan motor warms up and drops out after half an hour. (EV620 SABA repair tip)
• No display. Does not accept tape. After a few minutes, fault disappears.
• Functions are locked after connecting a peripheric on scart socket AV2.
• Operating info: date adjustment from year 2000.
• No colour.
• LED lights up sometimes in standby and gives a high level signal on pin 8 of SCART, which commutes the connected TV into AV mode.
• Tape rolls up inside the mechanism or tape is damaged.
• RC part number.
• M9655: inputting the operating time on non-standard cassettes.
• No start-up.
• No menu display on screen. Picture appears normally in PB or via tuner.
• Tape is damaged. No FF. No REW.
• All functions are blocked by the control panel and by the RC. Clock is frozen.
• Dead (after lightning strike).