EURAS System
    EURAS worldwideeuras.com    
EURAS System

ICC4104M90 / SABA [TV]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for ICC4104M90 / SABA.

List of fault symptoms:
  • No colour. No shutdown with RC. (ICC4104M90 SABA repair tip)
  • Snow in picture.
  • Canal Plus Decoder. Picture OK, but sound remains encrypted, with ICC4A.
  • Bluish screen. No luminance. Flyback raster on screen.
  • When the appliance is switched on, TP32 (S2000) and TP38 (BC369) blow. After replacement the appliance functions but when it is switched on the following day with the power switch the same fault is there again.
  • No functions. (extract of circuit diagram attached)
  • Picture framing is ok.
  • In UHF picture is always in a frequency which is too high.
  • Pumps at switch on for a few mins.
  • No luminance.
  • Intermittently TV takes 10 - 15 minutes to start up especially when cold.
  • All the UHF and VHF pictures are underlined in white.
  • Every now and then power supply cuts out every 5 mins and functions normally again. (ICC4104M90 SABA repair tip)
  • No function. No power supply voltage even when load has been removed.
  • Poor tuner reception in UHF/ VHF. Channels 1, 2, 3 appear more or less light with little waves over the whole of the screen.
  • Horizontal line. in the centre.
  • TP 32 defective. (Mains BU)
  • No sound. No picture. "PR" in display.
  • Either TV starts up with sound and the video/TV raster starts up with video noise and audio/TV starts up normally then 6 lines at the level of the display and channel order blocked, or TV starts up and functions well.
  • No HT. No signal on pin 10 of TEA2026.
  • No high channels.
  • Picture cannot be adjusted in the middle of the screen.
  • Very dark picture with predominant blue.
  • No German display.
  • Top half of picture is missing. Pot works but blocking in middle of screen.
  • Picture reduces to a line.

When SABA ICC4104M90 fails , these symptoms are known and EURAS knows the remedy/solution.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SABA ICC4104M90 fails can be better solved.

If SABA ICC4104M90 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SABA ICC4104M90 fails.

Chassis information is available (which chassis is built in into ICC4104M90 ).

EURAS system also knows 3 appliances having the same chassis as ICC4104M90 and can easily list them.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional TV/technicians/Video/household electronics repair shops which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/household/TV electronics repair shop close to you.

Already registered? open ICC4104M90 SABA in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SABA tech tips  











Last updated: 05. Nov 2009 13:01:12 MET, doccode ISO9002AS168EKA200805C [cachelite] EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.