EURAS System
    EURAS worldwideeuras.com    
EURAS System

CM260 / SAISHO [TV]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CM260 / SAISHO.

List of fault symptoms:
  • Empty raster. No function.
  • No green in the display unless the brightness is turned to minimum and loss of colour unless the brightness is turned up to 25% of its range, when colour floods the screen, looks plastic and no luminance.
  • Shading on left hand side of screen.
  • No green.
  • No vertical deflection.
  • Vertical wriggle on picture.
  • No green. No colour, unless brightness increased.
  • To improve reset timing of MDA2062, fit mod.
  • Stuck in standby. (SAISHO - CM260 information)
  • Station tuning is not possible. Screen is lit.
  • To improve reset timing of MDA2062, fit mod. (CM260 tips)
  • Picture shifted to one side.
  • Dead. (CM260 tips)
  • No colour.
  • No OSG. Screen is lit.
  • Screen is not lit. Sound is ok. (CM260 SAISHO repair tip)
  • Picture moved to right and automatic foldover.
  • No green in display unless the brightness is turned to minimum and loss of colour unless the brightness is turned up to 25 percent of its range.
  • Picture shifted to one side.
  • Blank raster no functions.
  • Excessive colour.
  • No picture.
  • HT value.
  • Dead. (service info for SAISHO -CM260)
  • Chopper transistor BUT11A is short circuit.
  • No audio.
  • Automatic foldover and picture moved to right.
  • Vertical collapse (intermittently).
  • Dark horizontal bars at top of picture under very strong signal conditions.
  • Screen is not lit. Standby LED is lit. No sound. Buzz from PSU switching transformer.
  • Partial field collapse.
  • Yellow blotches on screen, moving in response to depth of video modulation.
  • Picture moved to right hand side and folded over itself.
  • No TXT or OSD.
  • High uncontrollable brightness. (CM260 SAISHO repair tip)
  • Blank raster.
  • No OSD. No TXT.
  • Partial field collapse.
  • Shading on the left hand side of screen.
  • Shading on the left hand side of the screen.
  • Insufficient height (only 8 or 10cm) which may correct itself when warm.
  • Field foldover with flyback lines.
  • Picture ringing.
  • Colour fades after 1/2 hour.
  • Raster is blank plus flickering green lines at top of screen and strange noises from appliance.
  • No colour.
  • Vertical collapse.
  • No audio. No picture.
  • Dead. ON LED is lit. (CM260 tips)

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SAISHO CM260 fails can be better solved.

If SAISHO CM260 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SAISHO CM260 fails.

Chassis information is available (which chassis is built in into CM260 ).

EURAS system also knows 11 appliances having the same chassis as CM260 and can easily list them.

For CM260 there are 2 compatible appliances known and can be listed.


Do want to see this remedies/cures for repairtips?   Register here for the EURAS System

Already registered? open CM260 SAISHO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SAISHO tech tips  


(C) EURAS International Ltd.









Last updated: 05. Sep 2008 06:20:56 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany. All rights reserved, EURAS database V2.0 (C) 2002-2008. All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.