 |
CM260TT / SAISHO [TV]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for CM260TT / SAISHO.
List of fault symptoms:
- No picture.
- Picture moved to right hand side and folded over itself. (CM260TT tips)
- Dead. ON LED is lit.
- No vertical deflection.
- Blank raster no functions.
- No audio.
- Empty raster. No function.
- Chopper transistor BUT11A is short circuit.
- No colour.
- Dead.
- No audio. No picture.
- Stuck in standby.
- Dark horizontal bars at top of picture under very strong signal conditions. (CM260TT SAISHO repair tip)
- Dead.
- Screen is not lit. Standby LED is lit. No sound. Buzz from PSU switching transformer. (SAISHO - CM260TT information)
- Shading on left hand side of screen.
- Picture shifted to one side.
- Picture ringing.
- Partial field collapse. (CM260TT tips)
- No colour.
- No green in the display unless the brightness is turned to minimum and loss of colour unless the brightness is turned up to 25% of its range, when colour floods the screen, looks plastic and no luminance. (CM260TT tips)
- Yellow blotches on screen, moving in response to depth of video modulation.
- Raster is blank plus flickering green lines at top of screen and strange noises from appliance.
- Vertical wriggle on picture.
- Colour fades after 1/2 hour.
- Field foldover with flyback lines.
- Automatic foldover and picture moved to right.
- Picture moved to right and automatic foldover.
- No green in display unless the brightness is turned to minimum and loss of colour unless the brightness is turned up to 25 percent of its range.
- Picture shifted to one side.
- To improve reset timing of MDA2062, fit mod.
- To improve reset timing of MDA2062, fit mod.
- Screen is not lit. Sound is ok.
- Shading on the left hand side of screen.
- Station tuning is not possible. Screen is lit.
- HT value.
- Blank raster.
- High uncontrollable brightness.
- Excessive colour. (service info for SAISHO -CM260TT)
- Partial field collapse.
- Insufficient height (only 8 or 10cm) which may correct itself when warm.
- No OSG. Screen is lit.
- No OSD. No TXT.
- No green. No colour, unless brightness increased. (CM260TT tip from SAISHO)
- No TXT or OSD.
- Vertical collapse.
- Vertical collapse (intermittently).
- No green.
- Shading on the left hand side of the screen.
If SAISHO CM260TT fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when SAISHO CM260TT fails.
Chassis information is available (which chassis is built in into CM260TT ).
EURAS system also knows 11 appliances having the same chassis as CM260TT and can easily list them.
For CM260TT there are 2 compatible appliances known and can be listed.
Do want to see this remedies/cures for repairtips? Register here for the EURAS System
Already registered? open CM260TT SAISHO in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
SAISHO
tech tips
(C) EURAS International Ltd.
Last updated: 05. Sep 2008 06:30:27 MET, doccode ISO9002AS168EKA200805C EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All rights reserved, EURAS database V2.0 (C) 2002-2008.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|