 |
CK5039T / SAMSUNG [TV 51 (47/48) cm picture]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for CK5039T / SAMSUNG.
List of fault symptoms:
- Tripping. (CK5039T SAMSUNG repair tip)
- Bouncing picture.
- No sound. No picture. Reduced frame.
- Vertical foldover at bottom. Stretched vertical size at top. (CK5039T tips)
- Vertical collapse.
- Vertical size cramps when adjusted.
- No picture. (CK5039T SAMSUNG repair tip)
- Horizontal collapse. No tuning. intermittently.
- No luminance on picture or TXT.
- "AGING" displayed on screen. Only P+ and P- functional. No shut down from RC and no access to SERVICE mode.
- Reduced raster size. No picture. No audio.
- Pulsates at switch on, starts up only after a few seconds.
- Sub-tint adjustment. (+ extract of circuit diagram)
- Picture jitters.
- RF AGC adjustment.
- Severe picture purity errors. No sound.
- No luminance. in TXT.
- No start-up. Squealing from PSU.
- Adjustment when CRT is replaced.
- Dark picture. OK after a while . (service info for SAMSUNG -CK5039T)
- Sub-colour adjustment. (part of circuit diagram displayed)
- Screen adjustment.
- No VHF3 programs.
- Dim picture.
- White balance adjustment.
- Vertical jitter.
- FACTORY/SERVICE mode adjustment.
- Test pattern adjustment - Aging mode.
- PSU whistles.
- Adjustment when EEPROM is replaced.
- Restore factory settings.
- No picture. Audio OK .
- Focus adjustment.
- No vertical deflection.
- Dark picture, gradually worsens.
- Poor picture (colour unstable) when used with VCR
- ZD801 (R2KN) blown.
- No green. Red picture.
- Sub-contrast adjustment. (extract of circuit diagram attached)
- Centre convergence adjustment.
- PIF adjustment.
- Enter service mode.
- Picture impairment on start-up.
- No functions.
- Picture is reduced vertically 2-3cm.
- Poor vertical linearity.
- Factory mode adjustment.
- PSU control defective.
- Channels 5-12 have snow in picture. Channels 1-5 OK.
- HV check.
- SIF VCO adjustment.
- Cycles ON and OFF (standby) when trying to switch on from tandby. After a while, TV remains ON.
- R410 fails repeatedly.
- Dead.
- Geometry adjustment.
- Retrace lines. at top.
When SAMSUNG CK5039T fails , these symptoms are known and EURAS knows the remedy/solution.
Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SAMSUNG CK5039T fails can be better solved. If SAMSUNG CK5039T fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when SAMSUNG CK5039T fails.
|
Additionally to repairtips or service information CK5039T is linked to 30 components (IC's and/or transformers) in the Tectra
database, through which you can identify electrical compatibilities (crossreferences) in
appliances.
|
Chassis information is available (which chassis is built in into CK5039T ).
EURAS system also knows 36 appliances having the same chassis as CK5039T and can easily list them.
For CK5039T there are 2 compatible appliances known and can be listed.
In the repair discussion pinboard for CK5039T there are 62 replies to questions asked about 19 different repair problems. With access to EURAS you can all read them or enter your own questions and get help for CK5039T from EURAS technicians or other users.
Do you want to see this remedies/cures for repairtips? Register here for the EURAS System Please note: access to the EURAS System can be granted only to professional
technicians/Video/household electronics repair shops/TV which are
authorized for service by a manufacturer, or can prove to be professionally
certified to do repairs on electronic appliances. You will be asked for a
statement and information accordingly during registration.
If you do not qualify as stated above and you have an appliance that needs
technical service, we do recommend you to contact the manufacturer (for
example through his website) or go to a professional TV/Video/household
electronics repair shop close to you.
Already registered? open CK5039T SAMSUNG in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
SAMSUNG
tech tips
Last updated: 02. Dec 2008 01:51:09 MET, doccode ISO9002AS168EKA200805C EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|