 |
21B4T04NTX / SANG [TV]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for 21B4T04NTX / SANG.
List of fault symptoms:
- Black screen.
- Dark screen. Audio OK .
- Horizontal dark lines in centre of screen.
- Horizontal line. (21B4T04NTX tips)
- Picture remain visible in standby, but without colours, contrast, or brightness.
- Black streak in lower part and half a picture in upper part of the screen.
- Crackling noise. (service info for SANG -21B4T04NTX)
- IC304 (TDA7263M) fails repeatedly.
- No colour; lines; jumping - worse on bright scenes.
- Weak contrast.
- Cracking noise 4-5 times when switched on.
- Distorted audio from central speaker.
- Flyback lines. intermittently.
- No channels. No picture, only snow.
- Comes on for a short time. Switches to standby.
- No picture.
- No signal. No picture, only snow.
- Short non-linear frame (may improve as set warms up).
- No functions. (service info for SANG -21B4T04NTX)
- Basic features.
- No picture, only high tension.
- Blank raster. Audio and OSD OK .
- Flyback transformer slightly chirps.
- Switches off by itself. at high volume.
- No start-up.
- Trips when switched on.
- Screen adjustments.
- No reception.
- No RC functions.
- Arcing effect on high brightness.
- Vertical fault. at top.
- LED lights, no function.
- Yellow picture.
- Wow in audio.
- Enter service mode. (21B4T04NTX tip from SANG)
- Noise in audio (intermittently).
- No picture. OSD OK .
- White balance adjustment.
- Only starts on remote.
- No colour.
- Slow start-up. in standby. (21B4T04NTX SANG repair tip)
- RC code HQ.
- Distorted audio (only on certain channels).
- No E/W correction. (21B4T04NTX tip from SANG)
- No picture. Audio OK . No HV.
- Retrace lines. Excessive brightness.
- White screen. Flyback lines.
- Dim picture. (SANG - 21B4T04NTX information)
- Brightness varies.
- Does not switch to standby.
- No EE or PB picture.
- Dead. after lightning strike.
- No colour. Reduced vertical size.
- No horizontal synchronisation.
- Line output transistor (2SD1541) has blown.
- No front control operation or LED. Snowy raster. No tuning.
- Snowy picture, no channel LEDS and no volume.
- Intermittent colour. after warm-up.
- Horizontal output transistor fails repeatedly.
- No picture. Audio OK .
- Flyback lines.
- No functions with RC, only the internet functions.
- Defective menu, no OSD.
- Distorted audio. at high volume.
- R528 (10K) and C524 (220nF) keeps failing.
- Flyback transformer is defective. (21B4T04NTX SANG repair tip)
- Dark and bright streaking to the right in the picture, also during AV mode and menu displays.
- Skips channels during tuning.
- Blank raster.
- No start-up (intermittently).
- Stuck in standby.
- HV falshover at line transformer.
- Supply voltage adjustment. (part of circuit diagram displayed)
- Picture jitters at the top and bottom and lines after 30 mins.
- Excessive vertical size.
- Dead.
- Two bright lines approx 0,40 inches at lower and upper part of screen.
- OSD shifts or wrong colours when changing channels with RC.
- No function. Standby is not lit.
- Picture darkens then goes back to normal.
- No line oscillation.
- TV stuck on standard BG or DK. Cannot switch to L.
- Intermittently no colour, field foldover and loss of horizontal shift.
- AGC adjustment. (+ extract of circuit diagram)
- Intermittent low gain.
- Horizontal lines at top 3-4 inches.
- PSU defective.
- No start-up. Relay clicks . (SANG - 21B4T04NTX information)
- Geometry adjustment.
- No colour. Snow in picture. (SANG - 21B4T04NTX information)
- Vertical collapse. (service info for SANG -21B4T04NTX)
- Does not shut down.
- Coloured lines. at top.
- Blank raster. No audio. (21B4T04NTX tips)
- Poor picture. Low contrast.
- No function, goes to standby, red LED is on. Does not start up with RC.
- Hum bar.
- Linearity coil humming.
- Picture size increases and decreases.
- HT does not function.
- No TXT.
- Noise or click from PSU. No start-up.
With this service information, you may repair SANG 21B4T04NTX faster/better when it fails.
When SANG 21B4T04NTX fails , these symptoms are known and EURAS knows the remedy/solution.
Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SANG 21B4T04NTX fails can be better solved. If SANG 21B4T04NTX fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when SANG 21B4T04NTX fails.
|
Additionally to repairtips or service information 21B4T04NTX is linked to 20 components (IC's and/or transformers) in the Tectra
database, through which you can identify electrical compatibilities (crossreferences) in
appliances.
|
Chassis information is available (which chassis is built in into 21B4T04NTX ).
EURAS system also knows 470 appliances having the same chassis as 21B4T04NTX and can easily list them.
In the repair discussion pinboard for 21B4T04NTX there are 48 replies to questions asked about 25 different repair problems. With access to EURAS you can all read them or enter your own questions and get help for 21B4T04NTX from EURAS technicians or other users.
Do want to see this remedies/cures for repairtips? Register here for the EURAS System
Already registered? open 21B4T04NTX SANG in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
SANG
tech tips
(C) EURAS International Ltd.
Last updated: 25. Aug 2008 15:38:56 MET, doccode ISO9002AS168EKA200805C [cachelite] EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All rights reserved, EURAS database V2.0 (C) 2002-2008.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|