 |
21B4T04NTXS / SANG [TV]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for 21B4T04NTXS / SANG.
List of fault symptoms:
- Blank raster. Audio and OSD OK .
- No colour.
- No colour; lines; jumping - worse on bright scenes.
- No start-up (intermittently).
- No channels. No picture, only snow.
- No E/W correction.
- OSD shifts or wrong colours when changing channels with RC.
- R528 (10K) and C524 (220nF) keeps failing.
- No picture.
- Flyback transformer slightly chirps. (21B4T04NTXS SANG repair tip)
- Picture jitters at the top and bottom and lines after 30 mins.
- Retrace lines. Excessive brightness.
- No EE or PB picture.
- Line output transistor (2SD1541) has blown.
- Enter service mode.
- Blank raster.
- No picture. OSD OK . (SANG - 21B4T04NTXS information)
- No horizontal synchronisation.
- Horizontal dark lines in centre of screen.
- Yellow picture.
- Hum bar.
- Comes on for a short time. Switches to standby.
- TV stuck on standard BG or DK. Cannot switch to L.
- Picture size increases and decreases.
- Horizontal lines at top 3-4 inches.
- Arcing effect on high brightness.
- White balance adjustment. (21B4T04NTXS tip from SANG)
- No picture. Audio OK .
- IC304 (TDA7263M) fails repeatedly.
- Blank raster. No audio.
- Wow in audio.
- Black streak in lower part and half a picture in upper part of the screen. (21B4T04NTXS tips)
- No picture. Audio OK . No HV.
- Noise or click from PSU. No start-up.
- Dead.
- No RC functions.
- Dark and bright streaking to the right in the picture, also during AV mode and menu displays.
- Only starts on remote. (21B4T04NTXS tips)
- Poor picture. Low contrast.
- Distorted audio. at high volume.
- LED lights, no function.
- Snowy picture, no channel LEDS and no volume.
- Slow start-up. in standby.
- Dead. after lightning strike.
- Basic features.
- Horizontal line.
- Vertical collapse.
- Black screen.
- Defective menu, no OSD.
- No function, goes to standby, red LED is on. Does not start up with RC.
- Switches off by itself. at high volume.
- Short non-linear frame (may improve as set warms up).
- Trips when switched on.
- No line oscillation. (SANG - 21B4T04NTXS information)
- No TXT.
- HV falshover at line transformer.
- White screen. Flyback lines.
- Intermittent low gain.
- Crackling noise.
- Does not switch to standby.
- Picture darkens then goes back to normal.
- Supply voltage adjustment. (+ extract of circuit diagram)
- No picture, only high tension.
- No function. Standby is not lit.
- Two bright lines approx 0,40 inches at lower and upper part of screen.
- No front control operation or LED. Snowy raster. No tuning.
- Picture remain visible in standby, but without colours, contrast, or brightness.
- No start-up.
- Distorted audio (only on certain channels).
- Does not shut down.
- Stuck in standby.
- No reception.
- Flyback transformer is defective.
- Intermittent colour. after warm-up.
- Screen adjustments.
- PSU defective.
- Vertical fault. at top.
- No colour. Reduced vertical size.
- Distorted audio from central speaker.
- Brightness varies.
- Linearity coil humming.
- No functions with RC, only the internet functions.
- Weak contrast.
- Intermittently no colour, field foldover and loss of horizontal shift.
- Flyback lines. intermittently.
- Skips channels during tuning.
- AGC adjustment. (picture attached)
- HT does not function.
- RC code HQ.
- Geometry adjustment.
- Horizontal output transistor fails repeatedly.
- No signal. No picture, only snow.
- Dim picture.
- Excessive vertical size.
- No start-up. Relay clicks . (21B4T04NTXS tip from SANG)
- No functions.
- Cracking noise 4-5 times when switched on.
- Noise in audio (intermittently).
- Flyback lines.
- Coloured lines. at top.
- Dark screen. Audio OK .
- No colour. Snow in picture.
Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SANG 21B4T04NTXS fails can be better solved. If SANG 21B4T04NTXS fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when SANG 21B4T04NTXS fails.
|
Additionally to repairtips or service information 21B4T04NTXS is linked to 21 components (IC's and/or transformers) in the Tectra
database, through which you can identify electrical compatibilities (crossreferences) in
appliances.
|
Chassis information is available (which chassis is built in into 21B4T04NTXS ).
EURAS system also knows 470 appliances having the same chassis as 21B4T04NTXS and can easily list them.
In the repair discussion pinboard for 21B4T04NTXS there are 48 replies to questions asked about 25 different repair problems. With access to EURAS you can all read them or enter your own questions and get help for 21B4T04NTXS from EURAS technicians or other users.
Do want to see this remedies/cures for repairtips? Register here for the EURAS System
Already registered? open 21B4T04NTXS SANG in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
SANG
tech tips
(C) EURAS International Ltd.
Last updated: 05. Sep 2008 13:25:15 MET, doccode ISO9002AS168EKA200805C EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All rights reserved, EURAS database V2.0 (C) 2002-2008.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|