EURAS System
    EURAS worldwideeuras.com    
EURAS System

CBP2180 / SANYO [TV 55 (51) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CBP2180 / SANYO.

List of fault symptoms:
  • Line phase.
  • Intermittent low HT. 90V.
  • Weak contrast. in TXT.
  • Vertical shaking.
  • Set goes dead with bang and a puff of smoke.
  • Horizontal centre adjustment.
  • No signal.
  • Hanover bars. No sound.
  • Sibilance on Nicam sound.
  • Blank screen. Audio OK .
  • Trips. after a few seconds.
  • Vertical collapse. intermittently.
  • Switches to standby. after a few seconds.
  • Vertical size adjustment.
  • AGC adjustment.
  • Picture disappears after about 30 minutes. Sound OK.
  • B1 power supply adjustment.
  • Brightness varies. Buzz in audio. intermittently.
  • Focus adjustment.
  • Non linear field. (CBP2180 tip from SANYO)
  • Vertical foldover at top.
  • High voltage check.
  • Field foldover at top plus bent verticals and hum on sound.
  • Grey scale and tracking adjustment.
  • No tuning.
  • Non linear field. Lines all over screen.
  • No brightness. intermittently.
  • No entire standby.
  • Sub-brightness adjustment.
  • 3/4 Dark bands down picture.
  • Vertical linearity is defective. Foldover of top part of picture.
  • Tripping. after a few seconds.
  • Vertical collapse.
  • Line op tr.Blowing Q432.
  • Intermittent picture break up with field distortion.
  • Intermittently dead.
  • Black vertical bars in picture. Poor line sync.
  • No picture (intermittently).
  • No picture. Audio and OSD OK .
  • No or poor picture. OSD ok. Picture shifted to one side. Colour dropout. Text ok but shifted to one side.
  • Snow in picture. No tuning.
  • Stuck in standby.
  • Line shift.
  • Picture shifted to the right. intermittently.
  • Volume goes up even if muted.
  • Reduced vertical size at top.

With help of this list a solution is found often when SANYO CBP2180 fails.


Additionally to repairtips or service information CBP2180 is linked to 2 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CBP2180 ).

EURAS system also knows 5 appliances having the same chassis as CBP2180 and can easily list them.

For CBP2180 there are 2 compatible appliances known and can be listed.


In the repair discussion pinboard for CBP2180 there are 5 replies to questions asked about 3 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CBP2180 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional technicians/household electronics repair shops/TV/Video which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional TV/Video/household electronics repair shop close to you.

Already registered? open CBP2180 SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  











Last updated: 01. Dec 2008 22:12:54 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.