euras.com

CBP218000 / SANYO [TV 55 (51) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CBP218000 / SANYO.

List of fault symptoms:

Tripping. after a few seconds.
No tuning.
Non linear field. Lines all over screen.
Intermittent picture break up with field distortion.
Field foldover at top plus bent verticals and hum on sound.
Weak contrast. in TXT.
Trips. after a few seconds.
No brightness. intermittently.
Hanover bars. No sound.
No picture. Audio and OSD OK .
Picture disappears after about 30 minutes. Sound OK.
Focus adjustment.
Vertical foldover at top.
Vertical size adjustment.
Blank screen. Audio OK .
Line phase.
Horizontal centre adjustment.
Vertical shaking.
Sibilance on Nicam sound.
Vertical collapse. intermittently.
Line shift.
Vertical linearity is defective. Foldover of top part of picture.
Brightness varies. Buzz in audio. intermittently.
Reduced vertical size at top.
Picture shifted to the right. intermittently.
Grey scale and tracking adjustment.
Vertical collapse.
Snow in picture. No tuning. (CBP218000 tip from SANYO)
No signal.
High voltage check.
Intermittently dead.
Sub-brightness adjustment.
Line op tr.Blowing Q432.
Switches to standby. after a few seconds.
No entire standby.
No picture (intermittently). (SANYO - CBP218000 information)
Stuck in standby.
AGC adjustment.
No or poor picture. OSD ok. Picture shifted to one side. Colour dropout. Text ok but shifted to one side.
B1 power supply adjustment.
Volume goes up even if muted.
Intermittent low HT. 90V.
Set goes dead with bang and a puff of smoke. (SANYO - CBP218000 information)
Non linear field.
Black vertical bars in picture. Poor line sync.
3/4 Dark bands down picture.

If SANYO CBP218000 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO CBP218000 fails.

Additionally to repairtips or service information CBP218000 is linked to 2 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.

Chassis information is available (which chassis is built in into CBP218000 ).

EURAS system also knows 5 appliances having the same chassis as CBP218000 and can easily list them.

For CBP218000 there are 2 compatible appliances known and can be listed.

In the repair discussion pinboard for CBP218000 there are 5 replies to questions asked about 3 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CBP218000 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips? Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/TV/household electronics repair shops/technicians which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional TV/Video/household electronics repair shop close to you.

Already registered? open CBP218000 SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |

Back to EURAS Homepage >> All manufacturers >> SANYO tech tips

Last updated: 01. Dec 2008 23:37:07 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.