 |
CBP301100 / SANYO [TV]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for CBP301100 / SANYO.
List of fault symptoms:
- Horizontal centre adjustment.
- No start-up.
- Picture and heaters are missing.
- Sub-brightness adjustment. (CBP301100 SANYO repair tip)
- Brightness drops to zero after approximately half an hour.
- Stuck in standby.
- Dead.
- Colour adjustment.
- Greyscale and tracking adjustment.
- Set dead apart from the standby LED, which went off when the remote control was operated.
- AGC adjustment.
- HV check.
- No line drive, no frame drive and no video output from IC201. Supply OK and IC has been replaced.
- Video detector adjustment.
- Focus adjustment. (CBP301100 tip from SANYO)
- Does not go into standby (but only with the back on).
- Vertical size adjustment.
- Flyback lines cannot be removed with screen control.
- Lines superimposed on picture.
- Blank raster, sound ok, graphics ok when channel, volume etc. selected. (CBP301100 tips)
- Purity adjustment.
- Power supply adjustment. (CBP301100 SANYO repair tip)
- Tuning display width adjustment.
With this service information, you may repair SANYO CBP301100 faster/better when it fails.
When SANYO CBP301100 fails , these symptoms are known and EURAS knows the remedy/solution.
Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SANYO CBP301100 fails can be better solved. If SANYO CBP301100 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when SANYO CBP301100 fails.
Chassis information is available (which chassis is built in into CBP301100 ).
EURAS system also knows 8 appliances having the same chassis as CBP301100 and can easily list them.
In the repair discussion pinboard for CBP301100 there are 5 replies to questions asked about 1 different repair problems. With access to EURAS you can all read them or enter your own questions and get help for CBP301100 from EURAS technicians or other users.
Do you want to see this remedies/cures for repairtips? Register here for the EURAS System Please note: access to the EURAS System can be granted only to professional
household electronics repair shops/TV/technicians/Video which are
authorized for service by a manufacturer, or can prove to be professionally
certified to do repairs on electronic appliances. You will be asked for a
statement and information accordingly during registration.
If you do not qualify as stated above and you have an appliance that needs
technical service, we do recommend you to contact the manufacturer (for
example through his website) or go to a professional TV/Video/household
electronics repair shop close to you.
Already registered? open CBP301100 SANYO in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
SANYO
tech tips
Last updated: 01. Dec 2008 23:35:58 MET, doccode ISO9002AS168EKA200805C EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|