EURAS System
    EURAS worldwideeuras.com    
EURAS System

CEP2576 / SANYO [TV 63 (59) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP2576 / SANYO.

List of fault symptoms:
  • No picture. Audio OK .
  • No audio. (CEP2576 tips)
  • No picture, just snow when tuning selected. No sound
  • No E/W correction.
  • No raster.
  • No vertical deflection.
  • Clock flashing O S G text clock OK.
  • No start up after being turned off for several hours. It eventually starts up when attempting to switch on several times.
  • No start up. Fast tripping.
  • Mains fuse blown.
  • E/W fault. intermittently.
  • Snow in E-E.
  • No luminance signal. In TXT only page no. is visible.
  • Slow response to channel change, takes 20-30 secs to change. (CEP2576 tips)
  • Bright raster. Audio OK .
  • No function. No red LED.
  • Red, green and blue flyback lines.
  • E/W fault.
  • Switches to standby. Squealing noise.
  • R653 continues to fail.
  • Reduced vertical size.
  • Fast hiccup when connecting TV. LED flashes.
  • Stuck in standby.
  • No picture.
  • No picture, no sound, just snow when tuning selected.
  • No vertical sync. In TXT only page no. visible.
  • No horizontal or vertical deflection.
  • Shuts down (intermittently).
  • Vertical folover at bottom and insufficient height. Approx 20cm stripe on centre of screen.
  • Very dark and greyish picture.
  • No HT or tube heaters.
  • No picture. No sound. Rattles.
  • Lines in picture. at top.
  • Unstable picture. Difficulty in tuning. OK with scart.
  • Unable to switch out of standby when cold.
  • White streaks.
  • Tuning drifts.
  • SERVICE mode:
  • Attempts to start up, but does not succeed and switches to standby.
  • Enter service mode.
  • A few colour lines on top of picture. (service info for SANYO -CEP2576)
  • PSU switching transistor fails at start-up. (CEP2576 SANYO repair tip)
  • Transistor Q650 (BU508A) is S/C.
  • Q600 blown up. (service info for SANYO -CEP2576)
  • Excessive horizontal size. Pincushion distortion.
  • Collapses to a thin bowed horizontal line.
  • Corrupted data.
  • How to call up SERVICE mode.
  • Flyback lines. at top.
  • No function. Standby LED OFF. Pressing Standby, cracking from PTC.
  • Excessive brightness. Audio OK .
  • Switching FET (BUZ90A) defective.
  • Pincushion distortion. 5cm field collapse on each screen edges.
  • Blank raster, sound OK. OK if used with Scart input from VCR.
  • Vertical collapse.
  • Dead.
  • Doesn't function even if standby LED lights up. When pressing mains switch, attempts to start up but goes to standby.
  • Starts up, functions for a minute and immediately disconnects, remaining in standby.
  • White screen. Flyback lines. (CEP2576 SANYO repair tip)

If SANYO CEP2576 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO CEP2576 fails.


Additionally to repairtips or service information CEP2576 is linked to 26 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CEP2576 ).

EURAS system also knows 23 appliances having the same chassis as CEP2576 and can easily list them.

In the repair discussion pinboard for CEP2576 there are 5 replies to questions asked about 7 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP2576 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/technicians/TV/household electronics repair shops which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional TV/household/Video electronics repair shop close to you.

Already registered? open CEP2576 SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  











Last updated: 01. Dec 2008 16:57:32 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.