EURAS System
    EURAS worldwideeuras.com    
EURAS System

CEP2870D / SANYO [TV 70-74 (66-70) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP2870D / SANYO.

List of fault symptoms:
  • Unstable picture. Difficulty in tuning. OK with scart.
  • Switches to standby. Squealing noise.
  • No luminance signal. In TXT only page no. is visible.
  • Snow in E-E.
  • Fast hiccup when connecting TV. LED flashes.
  • No picture. No sound. Rattles.
  • No vertical sync. In TXT only page no. visible.
  • Excessive horizontal size. Pincushion distortion.
  • No E/W correction.
  • Starts up, functions for a minute and immediately disconnects, remaining in standby.
  • Attempts to start up, but does not succeed and switches to standby.
  • Clock flashing O S G text clock OK.
  • Excessive brightness. Audio OK . (service info for SANYO -CEP2870D)
  • White screen. Flyback lines.
  • Shuts down (intermittently).
  • Bright raster. Audio OK .
  • Unable to switch out of standby when cold.
  • Vertical folover at bottom and insufficient height. Approx 20cm stripe on centre of screen.
  • Reduced vertical size.
  • No HT or tube heaters.
  • R653 continues to fail.
  • Lines in picture. at top.
  • No raster.
  • No function. Standby LED OFF. Pressing Standby, cracking from PTC.
  • No function. No red LED.
  • No picture. (service info for SANYO -CEP2870D)
  • Collapses to a thin bowed horizontal line.
  • Stuck in standby.
  • Enter service mode.
  • Dead.
  • A few colour lines on top of picture.
  • Transistor Q650 (BU508A) is S/C.
  • Mains fuse blown.
  • Vertical collapse.
  • Flyback lines. at top. (service info for SANYO -CEP2870D)
  • No start up. Fast tripping.
  • No picture, just snow when tuning selected. No sound
  • SERVICE mode:
  • E/W fault.
  • PSU switching transistor fails at start-up.
  • Corrupted data.
  • Slow response to channel change, takes 20-30 secs to change.
  • Red, green and blue flyback lines.
  • No picture, no sound, just snow when tuning selected.
  • White streaks.
  • Very dark and greyish picture.
  • Tuning drifts.
  • How to call up SERVICE mode.
  • Pincushion distortion. 5cm field collapse on each screen edges.
  • No vertical deflection.
  • Doesn't function even if standby LED lights up. When pressing mains switch, attempts to start up but goes to standby.
  • No horizontal or vertical deflection.
  • Q600 blown up.
  • No audio.
  • Switching FET (BUZ90A) defective.
  • No picture. Audio OK .
  • Blank raster, sound OK. OK if used with Scart input from VCR.
  • E/W fault. intermittently.
  • No start up after being turned off for several hours. It eventually starts up when attempting to switch on several times.

With help of this list a solution is found often when SANYO CEP2870D fails.


Additionally to repairtips or service information CEP2870D is linked to 26 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CEP2870D ).

EURAS system also knows 23 appliances having the same chassis as CEP2870D and can easily list them.

For CEP2870D there are 2 compatible appliances known and can be listed.


In the repair discussion pinboard for CEP2870D there are 5 replies to questions asked about 7 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP2870D from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional household electronics repair shops/TV/Video/technicians which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/household/TV electronics repair shop close to you.

Already registered? open CEP2870D SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  











Last updated: 01. Dec 2008 16:53:28 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.