euras.com

CEP2872N / SANYO [TV 70-74 (66-70) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP2872N / SANYO.

List of fault symptoms:

Dead.
Enter service mode.
STEREO pilot adjustment.
Picture position at upper screen adjustment.
No picture (on upper half screen).
Negative picture (intermittently). (CEP2872N tips)
Horizontal lines. at top.
AGC adjustment.
No audio. No picture. (service info for SANYO -CEP2872N)
Pincushion adjustment - Near centre.
Chroma displaced.
Horizontal size adjustment.
FM output adjustment.
Transistor Q450 (2SD1555) fails after approx. 2 weeks run length.
PIP colour adjustment.
Cut-off adjustment.
Colour fault.
No colour via SCART and tuner. OSD, TXT and black and white picture are OK.
Colour bar adjustment.
Blurry picture. Audio OK .
Dead. Standby LED dimly lit.
Picture position at lower screen adjustment.
Smeary raster. Coloured bands.
Vertical centre adjustment.
White raster with colour patches.
Text lateral position adjustment.
No raster.
Defocused raster.
Flyback lines. on upper half screen.
B voltage adjustment.
Driver adjustment.
Separation adjustment. (CEP2872N tip from SANYO)
Pincushion fine adjustment - Near bottom. (CEP2872N SANYO repair tip)
HV confirmation.
NICAM adjustment.
No RC functions.
Screen adjustment.
Horizontal centre adjustment.
No picture, sometimes solid grey/red/green. Only green on PIP, TXT has varying colours.
Incorrect colours in picture.
Pincushion adjustment - Near bottom.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SANYO CEP2872N fails can be better solved.

If SANYO CEP2872N fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO CEP2872N fails.

Additionally to repairtips or service information CEP2872N is linked to 18 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.

Chassis information is available (which chassis is built in into CEP2872N ).

EURAS system also knows 10 appliances having the same chassis as CEP2872N and can easily list them.

For CEP2872N there are 5 compatible appliances known and can be listed.

In the repair discussion pinboard for CEP2872N there are 7 replies to questions asked about 3 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP2872N from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips? Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional TV/household electronics repair shops/technicians/Video which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional household/Video/TV electronics repair shop close to you.

Already registered? open CEP2872N SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |

Back to EURAS Homepage >> All manufacturers >> SANYO tech tips

Last updated: 01. Dec 2008 16:46:31 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.