EURAS System
    EURAS worldwideeuras.com    
EURAS System

CEP2872N00 / SANYO [TV 70-74 (66-70) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP2872N00 / SANYO.

List of fault symptoms:
  • Horizontal centre adjustment. (SANYO - CEP2872N00 information)
  • Incorrect colours in picture.
  • No audio. No picture.
  • FM output adjustment.
  • Cut-off adjustment.
  • Enter service mode.
  • Blurry picture. Audio OK .
  • No picture (on upper half screen).
  • Dead.
  • HV confirmation.
  • Picture position at upper screen adjustment.
  • Chroma displaced.
  • Flyback lines. on upper half screen.
  • No picture, sometimes solid grey/red/green. Only green on PIP, TXT has varying colours.
  • Smeary raster. Coloured bands.
  • Colour fault. (CEP2872N00 SANYO repair tip)
  • Pincushion adjustment - Near centre.
  • Driver adjustment.
  • B voltage adjustment.
  • Text lateral position adjustment.
  • Horizontal lines. at top. (CEP2872N00 SANYO repair tip)
  • Pincushion fine adjustment - Near bottom.
  • Dead. Standby LED dimly lit.
  • AGC adjustment.
  • Colour bar adjustment.
  • Separation adjustment.
  • No raster.
  • Picture position at lower screen adjustment.
  • Pincushion adjustment - Near bottom.
  • No colour via SCART and tuner. OSD, TXT and black and white picture are OK.
  • Transistor Q450 (2SD1555) fails after approx. 2 weeks run length.
  • Negative picture (intermittently).
  • Defocused raster.
  • White raster with colour patches.
  • PIP colour adjustment.
  • No RC functions.
  • Screen adjustment.
  • STEREO pilot adjustment.
  • NICAM adjustment.
  • Vertical centre adjustment.
  • Horizontal size adjustment.

With help of this list a solution is found often when SANYO CEP2872N00 fails.


Additionally to repairtips or service information CEP2872N00 is linked to 18 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CEP2872N00 ).

EURAS system also knows 10 appliances having the same chassis as CEP2872N00 and can easily list them.

For CEP2872N00 there are 5 compatible appliances known and can be listed.


In the repair discussion pinboard for CEP2872N00 there are 7 replies to questions asked about 3 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP2872N00 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/TV/household electronics repair shops/technicians which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/TV/household electronics repair shop close to you.

Already registered? open CEP2872N00 SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  











Last updated: 01. Dec 2008 22:43:53 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.