EURAS System
    EURAS worldwideeuras.com    
EURAS System

CEP2873N / SANYO [TV 70-74 (66-70) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP2873N / SANYO.

List of fault symptoms:
  • No picture (on upper half screen).
  • B voltage adjustment.
  • FM output adjustment.
  • Pincushion adjustment - Near centre.
  • Smeary raster. Coloured bands.
  • STEREO pilot adjustment. (CEP2873N tip from SANYO)
  • Picture position at upper screen adjustment.
  • Blurry picture. Audio OK .
  • Colour fault.
  • PIP colour adjustment.
  • Driver adjustment. (SANYO - CEP2873N information)
  • HV confirmation.
  • No picture, sometimes solid grey/red/green. Only green on PIP, TXT has varying colours.
  • No RC functions.
  • Transistor Q450 (2SD1555) fails after approx. 2 weeks run length. (CEP2873N SANYO repair tip)
  • Picture position at lower screen adjustment.
  • Cut-off adjustment. (CEP2873N SANYO repair tip)
  • Horizontal centre adjustment.
  • Enter service mode.
  • Pincushion fine adjustment - Near bottom.
  • Flyback lines. on upper half screen.
  • No colour via SCART and tuner. OSD, TXT and black and white picture are OK. (CEP2873N SANYO repair tip)
  • Chroma displaced.
  • Colour bar adjustment.
  • Incorrect colours in picture.
  • Dead. Standby LED dimly lit.
  • White raster with colour patches.
  • Horizontal lines. at top.
  • No raster.
  • Text lateral position adjustment.
  • Vertical centre adjustment.
  • AGC adjustment.
  • Negative picture (intermittently).
  • NICAM adjustment.
  • Dead.
  • No audio. No picture.
  • Pincushion adjustment - Near bottom. (CEP2873N tip from SANYO)
  • Defocused raster.
  • Horizontal size adjustment.
  • Screen adjustment.
  • Separation adjustment.

If SANYO CEP2873N fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO CEP2873N fails.


Additionally to repairtips or service information CEP2873N is linked to 18 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CEP2873N ).

EURAS system also knows 10 appliances having the same chassis as CEP2873N and can easily list them.

For CEP2873N there are 5 compatible appliances known and can be listed.


In the repair discussion pinboard for CEP2873N there are 7 replies to questions asked about 3 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP2873N from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/household electronics repair shops/TV/technicians which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/household/TV electronics repair shop close to you.

Already registered? open CEP2873N SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  











Last updated: 02. Dec 2008 00:09:52 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.