euras.com

CEP2873N00 / SANYO [TV 70-74 (66-70) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP2873N00 / SANYO.

List of fault symptoms:

Picture position at upper screen adjustment. (CEP2873N00 SANYO repair tip)
No RC functions.
Horizontal size adjustment.
Cut-off adjustment.
Screen adjustment. (SANYO - CEP2873N00 information)
Horizontal lines. at top.
NICAM adjustment.
HV confirmation.
Separation adjustment.
Text lateral position adjustment.
Chroma displaced.
No raster.
No picture, sometimes solid grey/red/green. Only green on PIP, TXT has varying colours. (SANYO - CEP2873N00 information)
Transistor Q450 (2SD1555) fails after approx. 2 weeks run length.
No picture (on upper half screen).
Colour fault.
PIP colour adjustment. (SANYO - CEP2873N00 information)
Blurry picture. Audio OK .
Pincushion adjustment - Near centre.
Horizontal centre adjustment.
FM output adjustment. (CEP2873N00 tips)
Pincushion fine adjustment - Near bottom.
Defocused raster. (CEP2873N00 SANYO repair tip)
AGC adjustment.
Smeary raster. Coloured bands.
White raster with colour patches.
Pincushion adjustment - Near bottom.
Negative picture (intermittently).
Vertical centre adjustment.
B voltage adjustment.
Enter service mode.
No audio. No picture. (CEP2873N00 SANYO repair tip)
Driver adjustment.
Dead. (service info for SANYO -CEP2873N00)
Colour bar adjustment.
STEREO pilot adjustment.
Picture position at lower screen adjustment.
Flyback lines. on upper half screen.
Dead. Standby LED dimly lit.

When SANYO CEP2873N00 fails , these symptoms are known and EURAS knows the remedy/solution.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SANYO CEP2873N00 fails can be better solved.

If SANYO CEP2873N00 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO CEP2873N00 fails.

Additionally to repairtips or service information CEP2873N00 is linked to 18 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.

Chassis information is available (which chassis is built in into CEP2873N00 ).

EURAS system also knows 10 appliances having the same chassis as CEP2873N00 and can easily list them.

For CEP2873N00 there are 3 compatible appliances known and can be listed.

In the repair discussion pinboard for CEP2873N00 there are 7 replies to questions asked about 3 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP2873N00 from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips? Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional technicians/TV/household electronics repair shops/Video which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional household/TV/Video electronics repair shop close to you.

Already registered? open CEP2873N00 SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |

Back to EURAS Homepage >> All manufacturers >> SANYO tech tips

Last updated: 01. Dec 2008 23:39:17 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.