EURAS System
    EURAS worldwideeuras.com    
EURAS System

CEP3012D / SANYO [TV]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP3012D / SANYO.

List of fault symptoms:
  • No picture. Stripes in picture.
  • No picture. Audio OK .
  • Chopper transistor S/C all the time with start on. (CEP3012D tip from SANYO)
  • Bright raster. Flyback lines.
  • Power supply adjustment.
  • Greyscale and tracking adjustment.
  • One third from top of screen has severe field cramp.
  • No audio. OK via SCART . (SANYO - CEP3012D information)
  • Vertical size adjustment. (CEP3012D SANYO repair tip)
  • Tripping.
  • Dark picture. No colour.
  • Starts up correctly. Sound and picture present for 5 sec, then goes into standby. Green lines during the first seconds.
  • Picture reduced to 10cm in the centre of the screen. (service info for SANYO -CEP3012D)
  • Horizontal centre adjustment.
  • Can not be switched on. LED flashes.
  • No function, loud whistle sound. (CEP3012D SANYO repair tip)
  • Line output transistor S/C.
  • PSU doesn't start-up.
  • Line output transistor Q432 (2SD1649) continuously fails.
  • Slow start-up.
  • HT high at approx 180V. (service info for SANYO -CEP3012D)
  • No functions.
  • Blank screen.
  • Stuck in standby.
  • Purity adjustment.
  • Colour adjustment.
  • HV check.
  • Ragged verticals.
  • Tuning display width adjustment.
  • Video detector adjustment. (CEP3012D SANYO repair tip)
  • Line output transistor continuously fails.
  • Goes into standby after 5 seconds.
  • Starts up then stops after 5 sec.
  • Variations in picture size according to level of picture luminance.
  • Vertical collapse.
  • Starts up in standby, then goes back into standby.
  • No start-up from standby.
  • Dead.
  • Vertical foldover at bottom.
  • Line output transistor fails repeatedly.
  • Focus adjustment.
  • Only vertical line.
  • Intermittent picture blanking.
  • White picture. Sometimes picture appears but only chroma.
  • Switches to standby. after a few seconds.
  • HT voltage low and no regulation.
  • Excessive brightness. Flyback lines.
  • Line transistor blows repeatedly.
  • No output from chopper power supply.
  • Distorted vertical linearity on top of screen.
  • Sub-brightness adjustment.
  • AGC adjustment.

When SANYO CEP3012D fails , these symptoms are known and EURAS knows the remedy/solution.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SANYO CEP3012D fails can be better solved.

If SANYO CEP3012D fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO CEP3012D fails.


Additionally to repairtips or service information CEP3012D is linked to 8 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CEP3012D ).

EURAS system also knows 21 appliances having the same chassis as CEP3012D and can easily list them.

In the repair discussion pinboard for CEP3012D there are 3 replies to questions asked about 1 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP3012D from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/TV/household electronics repair shops/technicians which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional household/Video/TV electronics repair shop close to you.

Already registered? open CEP3012D SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  











Last updated: 01. Dec 2008 22:16:07 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.