EURAS System
    EURAS worldwideeuras.com    
EURAS System

CEP3012T / SANYO [TV]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP3012T / SANYO.

List of fault symptoms:
  • Stuck in standby.
  • Excessive brightness. Flyback lines.
  • Starts up correctly. Sound and picture present for 5 sec, then goes into standby. Green lines during the first seconds.
  • White picture. Sometimes picture appears but only chroma.
  • Can not be switched on. LED flashes.
  • One third from top of screen has severe field cramp.
  • Starts up then stops after 5 sec. (service info for SANYO -CEP3012T)
  • No output from chopper power supply.
  • Switching on after replacing IC701 (M34300N4622SP).
  • No picture. Stripes in picture.
  • Goes into standby after 5 seconds.
  • Vertical collapse.
  • Video detector adjustment.
  • Switches to standby. after a few seconds.
  • Intermittent picture blanking.
  • Horizontal centre adjustment. (service info for SANYO -CEP3012T)
  • Line output transistor continuously fails.
  • Line transistor blows repeatedly.
  • Vertical foldover at bottom.
  • Purity adjustment. (CEP3012T SANYO repair tip)
  • Line output transistor fails repeatedly. (CEP3012T tip from SANYO)
  • No functions.
  • Tripping.
  • Picture reduced to 10cm in the centre of the screen.
  • Vertical size adjustment. (service info for SANYO -CEP3012T)
  • Chopper transistor S/C all the time with start on.
  • No function, loud whistle sound.
  • No picture. Audio OK .
  • Dead.
  • Sub-brightness adjustment.
  • Bright raster. Flyback lines.
  • HT high at approx 180V. (SANYO - CEP3012T information)
  • AGC adjustment.
  • Line output transistor Q432 (2SD1649) continuously fails.
  • Tuning display width adjustment.
  • PSU doesn't start-up.
  • HV check.
  • Only vertical line.
  • Power supply adjustment.
  • Distorted vertical linearity on top of screen.
  • Greyscale and tracking adjustment.
  • Slow start-up.
  • No audio. OK via SCART .
  • Dark picture. No colour. (service info for SANYO -CEP3012T)
  • No start-up from standby.
  • HT voltage low and no regulation.
  • Variations in picture size according to level of picture luminance. (SANYO - CEP3012T information)
  • Blank screen.
  • Focus adjustment.
  • Starts up in standby, then goes back into standby. (CEP3012T tips)
  • Line output transistor S/C.
  • Colour adjustment. (SANYO - CEP3012T information)
  • Ragged verticals.

If SANYO CEP3012T fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO CEP3012T fails.


Additionally to repairtips or service information CEP3012T is linked to 8 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CEP3012T ).

EURAS system also knows 21 appliances having the same chassis as CEP3012T and can easily list them.

In the repair discussion pinboard for CEP3012T there are 3 replies to questions asked about 1 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP3012T from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional Video/household electronics repair shops/technicians/TV which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/household/TV electronics repair shop close to you.

Already registered? open CEP3012T SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  











Last updated: 01. Dec 2008 23:56:20 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.