EURAS System
    EURAS worldwideeuras.com    
EURAS System

CEP3024D / SANYO [TV]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for CEP3024D / SANYO.

List of fault symptoms:
  • Vertical collapse.
  • Slow start-up.
  • Excessive brightness. Flyback lines. (SANYO - CEP3024D information)
  • Vertical size adjustment.
  • Greyscale and tracking adjustment.
  • Stuck in standby. (service info for SANYO -CEP3024D)
  • Line output transistor S/C.
  • Blank screen.
  • Dark picture. No colour. (SANYO - CEP3024D information)
  • Distorted vertical linearity on top of screen.
  • Ragged verticals.
  • Can not be switched on. LED flashes. (CEP3024D SANYO repair tip)
  • Goes into standby after 5 seconds. (CEP3024D tips)
  • One third from top of screen has severe field cramp.
  • Starts up correctly. Sound and picture present for 5 sec, then goes into standby. Green lines during the first seconds.
  • Dead.
  • HT high at approx 180V.
  • Chopper transistor S/C all the time with start on.
  • AGC adjustment.
  • Starts up in standby, then goes back into standby.
  • Sub-brightness adjustment. (SANYO - CEP3024D information)
  • Intermittent picture blanking.
  • PSU doesn't start-up.
  • Vertical foldover at bottom. (CEP3024D tips)
  • Variations in picture size according to level of picture luminance.
  • Tuning display width adjustment. (CEP3024D SANYO repair tip)
  • No picture. Audio OK .
  • Starts up then stops after 5 sec.
  • Switches to standby. after a few seconds.
  • No output from chopper power supply.
  • Line transistor blows repeatedly.
  • Colour adjustment.
  • HV check.
  • Line output transistor continuously fails.
  • Only vertical line.
  • Purity adjustment.
  • Horizontal centre adjustment.
  • Line output transistor Q432 (2SD1649) continuously fails.
  • Power supply adjustment.
  • White picture. Sometimes picture appears but only chroma.
  • Line output transistor fails repeatedly.
  • No picture. Stripes in picture.
  • Focus adjustment.
  • Tripping.
  • HT voltage low and no regulation.
  • No functions.
  • No start-up from standby.
  • Bright raster. Flyback lines.
  • Picture reduced to 10cm in the centre of the screen.
  • No function, loud whistle sound.
  • No audio. OK via SCART .
  • Video detector adjustment.

If SANYO CEP3024D fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO CEP3024D fails.


Additionally to repairtips or service information CEP3024D is linked to 8 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into CEP3024D ).

EURAS system also knows 21 appliances having the same chassis as CEP3024D and can easily list them.

In the repair discussion pinboard for CEP3024D there are 3 replies to questions asked about 1 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for CEP3024D from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional TV/technicians/Video/household electronics repair shops which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/TV/household electronics repair shop close to you.

Already registered? open CEP3024D SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  











Last updated: 01. Dec 2008 16:55:11 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.