EURAS System
   EURAS worldwideeuras.com    
EURAS System

VHR5200G / SANYO [Video recorder - VHS HiFi]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for VHR5200G / SANYO.

List of fault symptoms:
  • Lines run from the top to the bottom of the picture and there is rhythmic tracking interference.
  • Poor display.
  • Tuning does not function correctly and E-E sound hums.
  • Picture rolls. in E-E.
  • Attempts to load at power on.
  • RF AGC adjustment.
  • Carrier adjustment. (SANYO - VHR5200G information)
  • Flashing display.
  • Still vertical lock adjustment.
  • Appliance does not accept button commands.
  • No FF. No REW.
  • No deck functions.
  • When switching from forward search to FF, mechanism jams causing loading block to chatter.
  • Noise in picture.
  • Intermittently appliance switches to STOP from PLAY or REC.
  • Faulty capstan speed during PB and REC.
  • The fast forward and fast rewind commands are accepted, but the appliance does not wind.
  • No display.
  • White spots.
  • Tuner/band change cannot be switched to UHF.
  • During play the sound howls.
  • Slow tracking adjustment. (+ extract of circuit diagram)
  • Intermittently keys trip.
  • Continuous loading.
  • Intermittent capstan speed.
  • No audio. in E-E.
  • Sound disturbances on MW stations.
  • Chrominance signal recording current adjustment. (picture attached)
  • PB output level 2 adjustment.
  • Head drum turns continuously at switch-on. Display and setting of clock OK. No further functions.
  • PB level adjustment. (picture attached)
  • CCD level adjustment. (+ extract of circuit diagram)
  • Luminance signal recording current adjustment. (picture attached)
  • The sound goes out of tune. (VHR5200G tip from SANYO)
  • Dead.
  • Deviation adjustment. (extract of circuit diagram attached)
  • Sometimes appliance does not REW. In the display REW is shown but the tape does not move.
  • The fuse on the mains input panel keeps blowing. (VHR5200G tip from SANYO)
  • No PB. Pinch roller stops.
  • No functions.
  • Intermittently fails to lace up/unlace tape. (VHR5200G tips)
  • Intermittent white spots during playback.
  • No sound REC, leaves previous sound.
  • Blank raster. in E-E (intermittently).
  • CH1, CH2 switching position adjustment. (with circuit diagram extract)
  • No tuning. in UHF.
  • PLAY does not function remains in E-E mode, capstan and head drum runs constantly.
  • No function during play operation.
  • No tape functions.
  • Appliance does not lace up or will not unlace.
  • Very strong drop-outs during play. (service info for SANYO -VHR5200G)
  • Appliance does not unlace the tape. Rewind only works sometimes. If PB is selected, it switches to stand by.
  • No eject.
  • No colour. in E-E.
  • Loud squeaking during fast forward and rewind.
  • No picture. in REC.
  • PB output level 1 adjustment.
  • No REC. intermittently.
  • Bias adjustment.
  • Occasionally the tape does not lace up or will not unlace.
  • 12V power supply is intermittent.
  • No pinch roller solenoid operation.
  • Shortly after starting, the appliance switches to stop.
  • Break-up of picture with lines flashing on screen.
  • E-E level adjustment. (part of circuit diagram displayed)

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SANYO VHR5200G fails can be better solved.

If SANYO VHR5200G fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SANYO VHR5200G fails.


Additionally to repairtips or service information VHR5200G is linked to 3 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


For VHR5200G there are 6 compatible appliances known and can be listed.


Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional household electronics repair shops/Video/TV/technicians which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional TV/Video/household electronics repair shop close to you.

Already registered? open VHR5200G SANYO in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SANYO tech tips  












Last updated: 02. Dec 2008 01:36:24 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.