EURAS System
    EURAS worldwideeuras.com    
EURAS System

4601 / SBR [TV 47 (43) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for 4601 / SBR.

List of fault symptoms:
  • No picture. after a while. Low brightness. when cold. Audio OK .
  • No functions. Standby LED lit . (service info for SBR -4601)
  • Retrace line 1/4 of the way from top of screen.
  • Lines in picture. at top .
  • Raster collapses.
  • Connection of a loop system to the TV.
  • Raster line and flickering colour, poor sound intermittently.
  • RF AVR adjustment.
  • Vertical compressed at bottom of 1/3 screen, only a black band.
  • Dead.
  • Hum bar moving up and down.
  • No horizontal deflection.
  • Brief pop noise at switch off.
  • No vertical deflection.
  • No colour. (4601 tips)
  • Patterns in picture.
  • Bright flash as set turned on.
  • Brilliance and low lights vary (low lights won't adjust).
  • No colour.
  • Pincushion distortion. on sides.
  • Reduced horizontal deflection.
  • Blows chopper at switch on with remote.
  • Replacement of the IC SAF1031P with SAF1039P.
  • No quick start pulse.
  • Vertical sync adjustment.
  • Excessive vertical size. Buzz in audio.
  • No picture. intermittently.
  • Blows fuse after 20 mins.
  • No raster. No audio.
  • Flyback lines.
  • Weak contrast.
  • Trips.
  • White screen. Lines in picture.
  • Vertical roll. intermittently.
  • No luminance. Dark picture.
  • Horizontal roll.
  • Grey tone adjustment.
  • CRT cut off point adjustment.
  • Horizontal sync adjustment.
  • Arrow band moving up and down screen.
  • Retrace line 1/4 of way from top of screen.
  • Chopper blown.
  • Safety test after repair.
  • 131V rail high, no picture, no sound.
  • No tuning. only on certain channels.
  • Supply voltage (+131V) adjustment.
  • Connection of a loop system to the TV.
  • No power supply. Protection circuit triggered.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SBR 4601 fails can be better solved.

If SBR 4601 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SBR 4601 fails.


Additionally to repairtips or service information 4601 is linked to 1 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into 4601 ).

EURAS system also knows 90 appliances having the same chassis as 4601 and can easily list them.

For 4601 there are 5 compatible appliances known and can be listed.


Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional technicians/TV/Video/household electronics repair shops which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/TV/household electronics repair shop close to you.

Already registered? open 4601 SBR in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> SBR tech tips  











Last updated: 02. Dec 2008 02:06:19 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.