 |
6658 / SBR [TV 66 (62) cm picture]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for 6658 / SBR.
List of fault symptoms:
- Part no. change for mains switch.
- Replace IC SAA1060 with IC SAA1061.
- No picture or sound. Power supply OK.
- Band 4 and 5 will not work after replacing tuner.
- When transmitting, a "second language" comes through.
- TRD111 system memory loss.
- Flyback lines and black bar are visible in picture (when receiving without antenna signal).
- Lower side of picture is black.
- No picture, only lines.
- Shuts down (intermittently).
- Adaptionpanels to prevent double sound.
- Focus potentiometer. (6658 tip from SBR)
- Frame module without IC TDA2780 (short supply).
- TXT lines skip in cold condition.
- Shifting vertical centering with G7000.
- Appliance switches periodically to stereo without reason.
- When switching appliance on/off the clock display turns off.
- Switches to standby when TXT is started. LED doesn't light. Switches on only if TXT is switched off from RC
- External radiation from TV equipment on VR2020.
- Adjusting clock TXT decoder without measurement equipment.
- No storage. Program drops out, when key 1-4 is pressed.
- At switch on the screen lights up excessively but with no predominance of colour and goes into safety mode.
- Intermittent failure to tune to channel 40-. Tuner voltage deviates from voltage when tuning to channel is OK.
- Offset frequency problems.
- The current time is 1 minute behind.
- Does not tune on a channel in search mode.
- Connection of a loop system to the TV.
- Appliance spontaneously switches from UHF to VHF and back again.
- Dim program display LN526RA. (service info for SBR -6658)
- Control logic module.
- Line transformer with the same focus as HV cable plug.
- Will not tune on a channel in search mode.
- Focus/VG2 unit K12Z.
- No picture/sound. Power supplies are ok.
- TXT regulators skip in cold condition.
- Flyback lines.
- Moire in picture on the UHF range.
- Appliance switches spontaneously from UHF to VHF and back again.
- Double sound.
- When switching appliance on/off the clock display goes off.
- Appliance occasionally switches to stereo without reason.
- Safety test after repair.
- Very bright picture.
- Conversion to cable tuner V317LO.
If SBR 6658 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when SBR 6658 fails.
|
Additionally to repairtips or service information 6658 is linked to 5 components (IC's and/or transformers) in the Tectra
database, through which you can identify electrical compatibilities (crossreferences) in
appliances.
|
Chassis information is available (which chassis is built in into 6658 ).
EURAS system also knows 166 appliances having the same chassis as 6658 and can easily list them.
For 6658 there are 5 compatible appliances known and can be listed.
Do want to see this remedies/cures for repairtips? Register here for the EURAS System
Already registered? open 6658 SBR in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
SBR
tech tips
(C) EURAS International Ltd.
Last updated: 19. Aug 2008 14:50:02 MET, doccode ISO9002AS168EKA200805C [cachelite] EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All rights reserved, EURAS database V2.0 (C) 2002-2008.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|