euras.com

17239 / SCHAUBLORENZ [Video recorder]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for 17239 / SCHAUBLORENZ.

List of fault symptoms:

Fast Forward and rewind ok but not playing back tape.
No voltage supply. Fuses ok. No change after replacing C6 and TR2. (extract of circuit diagram attached)
Capstan motor does not start when cold. (picture attached)
No mode display on screen also no counter display.
To improve performance.
Appliance will not accept cassette, but will not switch to play. Manually turning the dial drum sometimes starts the appliance up. Capstan motor has been replaced. (with circuit diagram extract)
Capstan motor part number.
Capstan motor needs to be pushed manually. It turns backwards in PB and in FF it rewinds. (+ extract of circuit diagram)
Blocks with key displayed. No start up in PB from control panel or RC. REW does work from both.
To improve reliability. (picture attached)
No function. Display lights up and shows selected function. Cannot remove tape inserted. Sometimes fails right from the beginning or shortly after inserting tape. (with circuit diagram extract)
No power. Clock OK. Intermittent difficulty in ejecting. (with circuit diagram extract)
Capstan motor does not turn. IC504 has been changed. TR07 and motor have been changed. The appliance functions when started up manually.
The capstan motor does not start up. IC504 has already been changed. (+ extract of circuit diagram)
Capstan does not start. After a moment everything is ok.
Distorted picture during E-E. (picture attached)
Capstan motor stops and/or quivers. (picture attached)
Goes to power off mode. (picture attached)
Value of zener diode D106.
Capstan motor only starts if pushed manually (in PB as well as in REW). (+ extract of circuit diagram)
Loads normally. Drum turns. Goes into QUICK START position. If you press playback, security FR2 in the power uspply cuts out. (part of circuit diagram displayed)
Black and white picture in playback. Switch SW200 has already been changed.
Unlocking the child lock.
No functions shown on screen and no counter.
Hour display flashes but On/Off button on the front does not work. Will not load cassette. All the voltages seem to be correct. IC506 and quartz have already been replaced. (+ extract of circuit diagram)
Top edge of tape damaged.
REW lever is damaging pinch roller.
To improve tape transport performance, pinch roller has been changed.
Capstan runs at full speed in PLAY.
Faulty 9V supply. (picture attached)
Capstan motor defective. (+ extract of circuit diagram)
Doesn't pull tape back in.
Arm review height adjustment.
Appliance does not switch on. No function.
No switch on. Does not accept cassette. (with circuit diagram extract)
Eats tape.
TR5 (2SB891) fails repeatedly. (part of circuit diagram displayed)
Interference of SMPS. (with circuit diagram extract)
Strong moire effect (horizontal stripes). OSD jitter. (with circuit diagram extract)
Noise bars.
At start no start up of capstan motor. (+ extract of circuit diagram)
Tape laces up, drum runs at high speed, tape unlaces and appliance switches off. (with circuit diagram extract)
Capstan motor runs backwards in PB. (+ extract of circuit diagram) (service info for SCHAUBLORENZ -17239)
Parts information.
Information for PSU repair. (part of circuit diagram displayed)
Drum motor does not turn. (picture attached)
In PB picture foldsover or sways. Occasionally drum does not start up. (with circuit diagram extract)
Timer REC does not work on channel 7. (with circuit diagram extract)
Power supply squeals. (extract of circuit diagram attached)
Pinch roller causes a clicking noise.
Shuts down. (+ extract of circuit diagram)
Capstan motor stalls. (extract of circuit diagram attached)
Set will not turn on, no function. Display is lit up.
Dead. (extract of circuit diagram attached)
Power supply output voltages.

When SCHAUBLORENZ 17239 fails , these symptoms are known and EURAS knows the remedy/solution.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. SCHAUBLORENZ 17239 fails can be better solved.

If SCHAUBLORENZ 17239 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when SCHAUBLORENZ 17239 fails.

Additionally to repairtips or service information 17239 is linked to 14 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.

For 17239 there are 8 compatible appliances known and can be listed.

Do you want to see this remedies/cures for repairtips? Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional household electronics repair shops/technicians/Video/TV which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/TV/household electronics repair shop close to you.

Already registered? open 17239 SCHAUBLORENZ in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |

Back to EURAS Homepage >> All manufacturers >> SCHAUBLORENZ tech tips

Last updated: 02. Dec 2008 02:48:40 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.