 |
SW99TV14 / SEAWAY [TV]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for SW99TV14 / SEAWAY.
List of fault symptoms:
- Bright raster. No picture.
- Stuck in standby.
- No start-up.
- No audio. via SCART. OK via tuner .
- No picture, only snow. intermittently.
- Poor contrast, picture appears negative except for one inch at right hand side.
- Bright picture. Flyback lines.
- Only blurred, coloured haloes can be seen.
- Rainbow effect on screen. (SW99TV14 SEAWAY repair tip)
- Enter service mode.
- Tripping. Standby LED flashes .
- No shutdown with RC.
- Can only be turned ON and OFF via RC.
- Line freq half speed.
- No line lock.
- Dark/light shading.
- No functions.
- IC801 (STRS5707) faulty.
- Snow in picture.
- Dead. Power supply OK.
- Chirping.
- Occasionally dead.
- White screen. Flyback lines. Audio OK . (SW99TV14 SEAWAY repair tip)
- Vertical collapse.
- Bright picture. intermittently.
- Frame cramping after a few hours.
- Reduced raster size. No tuning.
- Lines in picture. at bottom (when cold).
- Dark picture (intermittently). Audio OK .
- No picture. Excessive RGB.
- Black band over image.
- No start-up from standby with RC.
- No LED display.
- Bright raster. Flyback lines. Reduced horizontal size.
- No start-up. intermittently (when cold).
- No start-up. intermittently.
- Intermittent no line drive-set appears dead - or line frequency drifts.
- Faint lines across screen with picture bowed at top and bottom. Hum bars on picture. (SEAWAY - SW99TV14 information)
- Bright raster. PSU pulsates.
- Reduced vertical size. Vertical foldover at bottom.
- Dead.
- Switches to protection mode (after start-up). (SEAWAY - SW99TV14 information)
- No start-up. when cold.
- Switches to standby.
- Loss and poor sync after few hours.
- No start-up. Standby LED flashes .
- No audio. No picture.
- Vertical foldover. after warm-up.
- Weak line lock
- Blank raster (intermittently). OK via SCART .
- No synchronisation.
- Programming fault. (SW99TV14 SEAWAY repair tip)
- Lack of brightness.
- Tripping.
- Field collapse noticed when A1 is advanced.
- Reduced vertical deflection. after warm-up.
- Three colour rings over whole picture.
- No start-up from standby.
- Poor synchronisation for approx 4 hours.
- Intermittently dead. No line drive.
- Switches off by itself.
- No channels.
- Partial field collapse
- No picture. Audio OK .
- Striations on frame or ringing.
- No vertical deflection.
- Flyback lines with bright white or varying brightness on picture, mainly when warm.
- Dead. Standby LED lit . (service info for SEAWAY -SW99TV14)
- Vertical collapse (intermittently). (service info for SEAWAY -SW99TV14)
- Partial frame collapse with foldover at bottom, or frame jumping.
- No reception.
- Stuck in standby. Line output transformer crackling.
- Blank screen. EHT and sound present. After several minutes picture is visible. (SW99TV14 tip from SEAWAY)
- Dead. PSU blown. (SW99TV14 tip from SEAWAY)
- Timer and power modes cannot be selected.
- No tuning or erratic tuning.
- No luminance.
- No start-up. Standby lights up 2 times shortly.
- Striations and flyback lines. (service info for SEAWAY -SW99TV14)
- No audio. Picture OK .
- Gradual field fold-over
- Line stage does not start up correctly.
- Insufficient height. When channel changing picture moves to top or bottom. (SW99TV14 tips)
- White screen. Retrace lines. at top.
- Vertical jitter.
- Dark on left hand side.
- Unstable picture.
- No vertical deflection. intermittently.
- No functions. Short ticking noise after switch on.
- No RC functions.
- Lack of height and no picture; sound can be heard slightly.
- Power regulator fails to start up.
- No OSD.
If SEAWAY SW99TV14 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when SEAWAY SW99TV14 fails.
|
Additionally to repairtips or service information SW99TV14 is linked to 58 components (IC's and/or transformers) in the Tectra
database, through which you can identify electrical compatibilities (crossreferences) in
appliances.
|
Chassis information is available (which chassis is built in into SW99TV14 ).
EURAS system also knows 144 appliances having the same chassis as SW99TV14 and can easily list them.
For SW99TV14 there are 3 compatible appliances known and can be listed.
In the repair discussion pinboard for SW99TV14 there are 54 replies to questions asked about 27 different repair problems. With access to EURAS you can all read them or enter your own questions and get help for SW99TV14 from EURAS technicians or other users.
Do want to see this remedies/cures for repairtips? Register here for the EURAS System
Already registered? open SW99TV14 SEAWAY in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
SEAWAY
tech tips
(C) EURAS International Ltd.
Last updated: 26. Aug 2008 13:48:09 MET, doccode ISO9002AS168EKA200805C [cachelite] EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All rights reserved, EURAS database V2.0 (C) 2002-2008.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|