 |
TDB28M70 / TANDBERG [TV]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for TDB28M70 / TANDBERG.
List of fault symptoms:
- Slow start-up.
- White balance adjustment.
- Poor picture. E/W fault. Line tearing.
- No start up. If it starts up, cannot be controlled or starts but switch transistor fails
- Switches on regularly then screen becomes black with three horizontal lines. No RC or manual functions accepted.
- Very low sound with volume at maximum. Background motorboating noise.
- No picture, only OSD. Occasionally picture appears but looses sync.
- Unstable OSD or picture.
- Black picture with TXT segments jumping on the screen.
- Incorrect syncronisms, vertical one especially.
- Picture shifted horizontally. Horizontal jitter. intermittently.
- Dark picture. No contrast.
- Automatic gain control adjustment.
- Unstable picture. Occasionally horizontal sync flickers.
- Dead.
- Low brightness.
- Switches off after approx 10 min. Standby LED goes out. (TDB28M70 tips)
- No synchronisation.
- Picture disappears after short operation time. Sound OK. Screen is dark.
- Tries to switch on then everything switches off even the LED.
- No audio. OSD audio control OK.
- No audio. Picture OK .
- OSD menu is shifted.
- Stops or no functions. (TANDBERG - TDB28M70 information)
- White screen. after warm-up. Flyback lines. after warm-up. (TDB28M70 tips)
- Excessive horizontal size. E/W fault.
- Does not start or starts poorly.
- Reduced vertical size.
- Audio module adjustment - Mono.
- Delayed colour.
- Distorted audio. Volume uncontrollable.
- Line tearing. at top. Reduced vertical size at bottom.
- Unstable picture. in PIP.
- BU 508AF has or gets B-E S/C.
- No audio. OK via SCART .
- No OSD.
- No audio. intermittently. OK via SCART .
- TDA4601 fails after short time
- Does not shut down.
- Horizontal output transistor T302 (BU508AF) fails immediately.
- Geometry adjustment.
- No audio. White screen. Flyback lines.
- No picture. Audio OK .
- Interference in picture. (TANDBERG - TDB28M70 information)
- No picture. at start-up. Audio OK .
- Ground noise on sound.
- Enter service mode. (TANDBERG - TDB28M70 information)
- Stuck in standby.
- Poor picture. Low contrast.
- No picture. intermittently. No functions.
- G2 adjustment.
- Switches to standby. after a few hours.
- Noise in audio.
- Shuts down (intermittently). (TDB28M70 tips)
- East, west fault or hourglass shape.
- No audio. via tuner. OK via SCART .
- Cuts out completely after indefinite time. Must be switched on again with mains switch.
- No vertical deflection.
- E/W circuit CI305 S/C and T302 becomes hot.
- E/W fault.
Tips are coming from EURAS customers, workshops and payed technicians from all over the world. TANDBERG TDB28M70 fails can be better solved. If TANDBERG TDB28M70 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register. With help of this list a solution is found often when TANDBERG TDB28M70 fails.
|
Additionally to repairtips or service information TDB28M70 is linked to 21 components (IC's and/or transformers) in the Tectra
database, through which you can identify electrical compatibilities (crossreferences) in
appliances.
|
Chassis information is available (which chassis is built in into TDB28M70 ).
EURAS system also knows 37 appliances having the same chassis as TDB28M70 and can easily list them.
In the repair discussion pinboard for TDB28M70 there are 16 replies to questions asked about 13 different repair problems. With access to EURAS you can all read them or enter your own questions and get help for TDB28M70 from EURAS technicians or other users.
Do want to see this remedies/cures for repairtips? Register here for the EURAS System
Already registered? open TDB28M70 TANDBERG in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
TANDBERG
tech tips
(C) EURAS International Ltd.
Last updated: 23. Aug 2008 23:15:57 MET, doccode ISO9002AS168EKA200805C [cachelite] EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All rights reserved, EURAS database V2.0 (C) 2002-2008.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|