 |
TM1710NLD / TARGA [Monitors]
The EURAS repair tip database for professional technicians and service engineers
supplies the following faults for TM1710NLD / TARGA.
List of fault symptoms:
- High voltage circuit adjustment.
- PSU switches off.
- Horizontal size adjustment.
- Dead.
- Goes poorly out of standby mode, sometimes distorted picture.
- No function - S/C in the PSU.
- Picture is vertically too large. Vertical shift and amplitude react. Picture position easily twitches vertically.
- Picture is too wide, E/W fault.
- Goes poorly out of standby mode, sometimes distorted picture.
- White balance adjustment.
- Focus adjustment.
- After switch on picture goes dark and bright.
- Power supply voltage check.
- Horizontal centre adjustment.
- Vertical linearity adjustment.
- No function - S/C fuse F101 is defective.
- Horizontal frequency conversion circuit.
- Voltages at IC305 (LA7856).
- Horizontal oscillation adjustment. (TARGA - TM1710NLD information)
- Side pincushion correction. (TM1710NLD tips)
- No function - PSU ticks.
- Fuse F101 is blown.
- Pincushion distortion at the top.
- Specifications. (TM1710NLD tips)
- Cut-off adjustment.
- No function - relay clicking heard twice (at switch on).
- Vertical size adjustment.
- Voltages at plug P106 and P102.
- No picture, background gets bright when brightness increased, perhaps with horizontal tearing.
- PSU fails again.
- Vertical oscillation adjustment.
- No start-up.
- No picture.
With help of this list a solution is found often when TARGA TM1710NLD fails.
|
Additionally to repairtips or service information TM1710NLD is linked to 4 components (IC's and/or transformers) in the Tectra
database, through which you can identify electrical compatibilities (crossreferences) in
appliances.
|
For TM1710NLD there are 2 compatible appliances known and can be listed.
Do you want to see this remedies/cures for repairtips? Register here for the EURAS System Please note: access to the EURAS System can be granted only to professional
Video/TV/household electronics repair shops/technicians which are
authorized for service by a manufacturer, or can prove to be professionally
certified to do repairs on electronic appliances. You will be asked for a
statement and information accordingly during registration.
If you do not qualify as stated above and you have an appliance that needs
technical service, we do recommend you to contact the manufacturer (for
example through his website) or go to a professional household/Video/TV
electronics repair shop close to you.
Already registered? open TM1710NLD TARGA in EURAS
All details on the EURAS System: English |
Deutsch |
Français |
Italiano |
Español |
Magyarul |
Português |
Polski |
Română |
Greek |
Back to EURAS Homepage >>
All manufacturers >>
TARGA
tech tips
Last updated: 11. Oct 2008 12:49:56 MET, doccode ISO9002AS168EKA200805C EURASMOP
Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.
|
|