euras.com

BS950 / TEC [TV (chassis)]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for BS950 / TEC.

List of fault symptoms:

No picture or sound. Display shows P1. No response to control on appliance. Display flashes when RC keys are pressed.
White screen. No audio.
Picture shifted to the bottom.
Distorted picture.
No picture content. White picture gets saturated and appliance switches off. Sound OK.
No sound. Crackling noise and light hum are heard at switch on.
No picture. No sound. Static discharge at switch on. (TEC - BS950 information)
Enter Service Menu.
No picture or sound. Only dots on the screen.
Snow on some VHF channels intermittently. Picture in UHF OK.
Specks in grey parts of picture. Grey to black transitions go in steps.
No picture.
Blue screen with white lines at switch-on, then appliance switches off.
Enter service mode.
Field has shifted towards bottom of screen.
No colour on main picture. Colour is OK with PiP. No picture in AV mode.
Faulty Dutch TXT.
Power supply fuse has blown.
White screen then immediately switches off.
Blue screen at switch-on, then appliance switches off.
No function. Only three dots in display.
Teletext does not work.
Does not start up. Display lights up. (TEC - BS950 information)
Shaking vertical deflection. (BS950 tip from TEC)
Picture runs horizontally. Black band of approx 10cm.
Very dark screen. Sound OK.
Stuck in standby. (service info for TEC -BS950)
E/W fault.
Picture cuts out on VHF tuner.
Picture torn with intermittent sound in UHF mode. Everything OK in VHF mode.
No picture (nor via AV scart). Sound, OSD and TXT are OK.
Low audio.
White screen then immediately switches off. Blurred TXT. Sound OK.
Loss of red. All other functions OK.
No picture. Sound OK. Picture OK via SCART.
Does not switch on with RC. OK with mains switch.
Colour tending towards red.
Completely blue screen at switch on, then appliance switches off.
Displays C55. RC and user control don't function. (service info for TEC -BS950)
White screen at switch on then appliance switches off.
Dark screen. Cannot be controlled by RC.
No start-up. (BS950 TEC repair tip)

If TEC BS950 fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when TEC BS950 fails.

For BS950 there are 4 compatible appliances known and can be listed.

In the repair discussion pinboard for BS950 there are 11 replies to questions asked about 4 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for BS950 from EURAS technicians or other users.

You can display a list with all appliances that have build in the BS950/TEC chassis.

Do you want to see this remedies/cures for repairtips? Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional household electronics repair shops/TV/Video/technicians which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional TV/household/Video electronics repair shop close to you.

Already registered? open BS950 TEC in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |

Back to EURAS Homepage >> All manufacturers >> TEC tech tips

Last updated: 11. Oct 2008 05:13:18 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.