EURAS System
    EURAS worldwideeuras.com    
EURAS System

WD14J / WINDSOR [TV 36/37 (34-36) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for WD14J / WINDSOR.

List of fault symptoms:
  • PSU pulsates quickly at switch on.
  • Blue screen. (WD14J tip from WINDSOR)
  • Horizontal line.
  • No HV.
  • Picture folds down at the bottom. Linearity and vertical position cannot be adjusted.
  • No start-up from standby.
  • Picture appears slowly (5-10 mins later after start-up). Audio OK.
  • Audio dropouts via SCART socket.
  • Strong continuous chirp from mains transformer with normal operation. Horizontal interference lines (pinch).
  • TV does not switch on. Standby LED flickers.
  • Intermittently switches off and goes to standby. If switched on again, a digit key has to be pressed on RC.
  • Stuck in standby.
  • HV output stage (BU808DFI) defective.
  • No picture. Audio OK .
  • Picture is instable, horizontal lines from the top to the bottom.
  • Chassis type.
  • Does not start up. Standby LED is present at switch-on. LED becomes green for one sec., then it switches off.
  • Dead (intermittently).
  • Line output transistor faulty.
  • 2-3 cm horizontal stripe in the middle of screen. (WD14J tips)
  • Vertical lines. Unstable picture.
  • Black vertical bar. on the left.
  • Appliance stuck in BG mode.
  • No start-up. Display flashes .
  • Vertical deflection reduced to 2-4 cm.
  • Green picture. Flyback lines. (WINDSOR - WD14J information)
  • Vertical streaks.
  • R809 and R821 smoking after a few minutes.
  • No picture. Blank raster. Audio OK .
  • Key-LED lights green for a short time, then becomes red.
  • BU808DFI fails every so often.
  • No funciona. LED en rojo (WINDSOR - WD14J information)
  • Volume uncontrollable. Crackling audio, in standby. OK after a few mins.
  • No horizontal or vertical deflection.
  • Dead.
  • No function via 12/24V power supply.
  • No functions.
  • RC is defective.
  • Enter service mode.
  • Blue picture. Retrace lines.
  • No start-up. LED is red .
  • Switches to protection mode.
  • Squealing noise. at start-up.
  • 8V missing.
  • Blue screen. Flyback lines. (WD14J tips)
  • Slow start-up.
  • No start-up from standby. LED is red . No line drive.
  • Q602 trips repeatedly.
  • Dark picture.
  • Dark stripes in picture after a few minutes. Growing thicker and distorting the picture.
  • Tripping. (WD14J tips)
  • No start-up.
  • No colour.
  • Switches to standby (after warm-up).

With help of this list a solution is found often when WINDSOR WD14J fails.


Additionally to repairtips or service information WD14J is linked to 72 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into WD14J ).

EURAS system also knows 320 appliances having the same chassis as WD14J and can easily list them.

For WD14J there are 12 compatible appliances known and can be listed.


In the repair discussion pinboard for WD14J there are 42 replies to questions asked about 17 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for WD14J from EURAS technicians or other users.

Do you want to see this remedies/cures for repairtips?   Register here for the EURAS System
Please note: access to the EURAS System can be granted only to professional TV/household electronics repair shops/technicians/Video which are authorized for service by a manufacturer, or can prove to be professionally certified to do repairs on electronic appliances. You will be asked for a statement and information accordingly during registration.

If you do not qualify as stated above and you have an appliance that needs technical service, we do recommend you to contact the manufacturer (for example through his website) or go to a professional Video/TV/household electronics repair shop close to you.

Already registered? open WD14J WINDSOR in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> WINDSOR tech tips  











Last updated: 14. Oct 2008 01:31:06 MET, doccode ISO9002AS168EKA200805C EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany.
All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.