EURAS System
    EURAS worldwideeuras.com    
EURAS System

WD14SB / WINDSOR [TV 36/37 (34-36) cm picture]

The EURAS repair tip database for professional technicians and service engineers supplies the following faults for WD14SB / WINDSOR.

List of fault symptoms:
  • Stuck in standby. (WINDSOR - WD14SB information)
  • Vertical lines. Unstable picture.
  • Blue screen. Flyback lines.
  • No funciona. LED en rojo (WD14SB WINDSOR repair tip)
  • No horizontal or vertical deflection.
  • BU808DFI fails every so often.
  • HV output stage (BU808DFI) defective.
  • Blue screen.
  • Dead (intermittently).
  • R809 and R821 smoking after a few minutes.
  • Tripping.
  • 8V missing.
  • Q602 trips repeatedly.
  • Does not start up. Standby LED is present at switch-on. LED becomes green for one sec., then it switches off.
  • Horizontal line.
  • Picture is instable, horizontal lines from the top to the bottom.
  • No start-up from standby. LED is red . No line drive.
  • Strong continuous chirp from mains transformer with normal operation. Horizontal interference lines (pinch).
  • Squealing noise. at start-up.
  • Intermittently switches off and goes to standby. If switched on again, a digit key has to be pressed on RC.
  • TV does not switch on. Standby LED flickers.
  • No start-up. Display flashes .
  • Black vertical bar. on the left.
  • No picture. Audio OK .
  • Vertical streaks.
  • Switches to protection mode.
  • Dead. (WD14SB WINDSOR repair tip)
  • Appliance stuck in BG mode.
  • No start-up.
  • Vertical deflection reduced to 2-4 cm.
  • No functions.
  • No picture. Blank raster. Audio OK .
  • Green picture. Flyback lines.
  • RC is defective.
  • No start-up from standby.
  • Chassis type.
  • 2-3 cm horizontal stripe in the middle of screen.
  • Dark picture.
  • No function via 12/24V power supply.
  • No start-up. LED is red .
  • Picture folds down at the bottom. Linearity and vertical position cannot be adjusted.
  • Dark stripes in picture after a few minutes. Growing thicker and distorting the picture.
  • Key-LED lights green for a short time, then becomes red.
  • PSU pulsates quickly at switch on.
  • Switches to standby (after warm-up).
  • No colour.
  • Blue picture. Retrace lines. (service info for WINDSOR -WD14SB)
  • No HV.
  • Slow start-up.
  • Unstable picture.
  • Line output transistor faulty.
  • Enter service mode.

Tips are coming from EURAS customers, workshops and payed technicians from all over the world. WINDSOR WD14SB fails can be better solved.

If WINDSOR WD14SB fails, this information will help you. Here you can only see the symptom list, to access remedies, you must register.

With help of this list a solution is found often when WINDSOR WD14SB fails.


Additionally to repairtips or service information WD14SB is linked to 60 components (IC's and/or transformers) in the Tectra database, through which you can identify electrical compatibilities (crossreferences) in appliances.


Chassis information is available (which chassis is built in into WD14SB ).

EURAS system also knows 327 appliances having the same chassis as WD14SB and can easily list them.

For WD14SB there are 12 compatible appliances known and can be listed.


In the repair discussion pinboard for WD14SB there are 42 replies to questions asked about 16 different repair problems.
With access to EURAS you can all read them or enter your own questions and get help for WD14SB from EURAS technicians or other users.

Do want to see this remedies/cures for repairtips?   Register here for the EURAS System

Already registered? open WD14SB WINDSOR in EURAS

All details on the EURAS System: English | Deutsch | Français | Italiano | Español | Magyarul | Português | Polski | Română | Greek |


Back to EURAS Homepage >> All manufacturers >> WINDSOR tech tips  


(C) EURAS International Ltd.









Last updated: 17. Aug 2008 03:36:17 MET, doccode ISO9002AS168EKA200805C [cachelite] EURASMOP

Responsible for the content: EURAS International GmbH, Eime, Germany. All rights reserved, EURAS database V2.0 (C) 2002-2008. All brand- or productnames are copyrighted by the respective manufacturer of the appliance and are only being used for identification purposes.